Techincal data and specification on Screw explosion proof Ingersoll Rand air compressor
1. Equipment name and type.
Screw type Air compressor
item |
name |
Model and type |
remark |
1 |
Screw type Air compressor |
MSC160-11 |
Produced by AIRTEC |
2. Scope of supply and equipment list: of the Air compressor body.
1. Main body of the air compressor
Item |
Name |
Unit |
Qty |
1 |
Main engine |
Set |
1 |
2 |
Explosion-proof electric motor |
Set |
1 |
3 |
Automatic air regulating device |
Set |
1 |
4 |
Oil and gas separator |
Set |
1 |
5 |
Oil cooler |
Set |
1 |
6 |
After cooler |
Set |
1 |
7 |
Trap |
Set |
1 |
8 |
Operational dashboard |
Set |
1 |
9 |
Oil system with oil temperature automatic control valves and oil filter |
Set |
1 |
10 |
Cooling fan |
Set |
1 |
11 |
Air filter |
Set |
1 |
12 |
Base |
Set |
1 |
13 |
Thermometers and pressure gauges (ruggedized) |
Set |
1 |
14 |
Acoustic enclosure |
Set |
1 |
2. Document: operation manual and spare parts manual, quality certificates
3. Special tools
4. Needed spare parts with the main equipments
3. Main Data of Screw air compressor:
Name |
|
Micro oil screw air compressor |
Type |
|
MSC160-11 |
Flow (FAD) |
m3/min |
20 |
Intake air pressure(Absolute pressure) |
Bar |
1 |
Discharge pressure(Gauge pressure) |
Bar |
11 |
Speed of Main motor |
rpm |
1480 |
Rated Capacity of Axis |
KW |
172 |
Way of Transmission |
|
Direct drive of gear |
Maximum temperature |
Celsius Degree |
46 |
Value of CTD |
Celsius Degree |
15 |
Cooling method |
|
Air cool |
Oil content in Exhaust |
ppm |
Less than 3 |
Power Source |
|
380V/50HZ/3PH |
Rated Capacity of motor |
Kw |
160 |
service coefficient |
|
1.15 |
Explosion-proof degree |
|
ExdIIBT4 |
Insulation class |
|
F |
Noise |
dB(A) |
82 more or less3 |
Outer dimension |
mm |
3400x1450x1900 |
Set weight |
Kg |
Around 4000 |
Remark: FAD is the total capacity of the compressor, to be tested to ISO1217:1996Annex C of CAGI-PNEUROP. Ingersoll Rand is one of the members of CAGI-PNEUROP.
4. Apart from normally known of Ingersoll Rand compressor quality, this special compressor will be with following characters to meet your demands:
4.1 Compressor unit composed of containing box to reduce the noise, all the air, oil electric, cooling (including after cooling, control instruments related equipments assembled as one complete unit.
4.2 Main body of Ingersoll Rand main machine.
4.3 Main machine bearing with high rigidness design.
4.4 The compressor uses 40% less connection points than others�?which will increase performance and reliability.
4.5 Lube system has automatic temperature control valve, using machine’s own pressure to lubricate other systems.
4.6 Oil separating system using secondary back flow separating method, separator core is of winkle type with 15 layers fiber.
4.7 Electric systems: main motor, and electric fan using explosion motors with ExdIIBT4 level; control panels are of explosion-proof. All the electric control systems can meet demands of factory explosion proof demands (no need of marine test demand)
4.8 The compressor is prefilled with Ingersoll Rand Super coolant of ULTRACOOLANT
4.9 Compressor can work efficiently under ambient temperature of 46 C Degree.
4.10 Surface for the parts are surface treated (with paints or galvanized ), to reinforce the proof of corrosion and marine condition usage. Noise insulation board also reinforced to resist the strong wind with design standard against 12 level Typhoon
4.11 Outer connect flange to AMSE standard.
|