Power Station Quotation
1. SCOPE OF SUPPLY
There are 6 CNPC-18H 32/40V diesel generating sets, six (6) exhaust-heat boilers for Power Project�?/SPAN>17MW diesel fuel oil power station, each set standard power:8243KW, Generating sets voltage: 10.5kV, Frequency: 60Hz, PF: 0.8pf, Speed: 720rpm.
The equipment will be designed and constructed for operation at following conditions:
Standard environmental conditions:
Ambient Air temperature : |
25 °C |
Total barometric pressure : |
1000 mbar |
Cooling water temperature : |
32 °C |
Cooling system: |
Cooling Equipment |
Relative humidity: |
Max. 30% |
Design environmental conditions:
-Maximum ambient air temperature |
55 °C |
-Minimum ambient air temperature |
5 °C |
-Design air temperature |
50 °C |
-Altitude |
100m |
-Relative humidity |
56�?/SPAN> |
-wind speed |
140 km/h |
-Environment |
Dust/Sand |
Note (Does not contain the following contents): Main transformer, electricity transmission.
2. PRICE
2.1 EPC PRICE
|
Name |
Description |
Unit |
Quantity |
1 |
18H32/40V
Generator set |
Engines, couplings, generators, common base, control system, spare parts |
set |
6 |
2 |
Power house and auxiliary |
Lubricant separation module, fuel supply module, leaking oil and decontamination module inlet filter silencer module, nozzle cooling modules, engine warm-up module |
set |
6 |
Pump Station |
Water maintenance module, heavy oil separation module, air bottles, air compressor |
Radiator, exhaust |
Radiator, exhaust silencer |
Distribution room |
Switchgear, feeder panel, neutral grounding resistor cabinet PT cabinets, DC screens, power distribution cabinets, station transformer |
Offloading unit |
Diesel oil, lubricating oil offloading unit |
Auxiliary |
Auxiliary rated power |
3 |
Waste heat boiler |
|
set |
6 |
4 |
Power plant overall design |
|
set |
1 |
5 |
The power station equipment installation, installation material and debugging and On-Shore Cost |
Piping system (tubing, pipes, trachea, smoke tubes, etc.), cables, wires, bridge, Building extension and foundation refurbishment, Start-up, site testing and commissioning, Site Training and so on |
set |
1 |
Total�?/DIV>
(EPC price) |
United States Dollars Forty One Million Five Hundred and Forty Four Thousand Seven Hundred and Twenty Only ($41,544,720.00) |
2.2 Payment of the Maintenance Program
We has agreed that the 1 year maintenance service charge is: (the charge includes spare parts during the contract period, our management charge, labor cost, overtime cost, emergency repair cost, transportation cost, and necessary testing equipment for maintenance personnel etc.).
Description |
Period(Month) |
Maintenance Cost(USD) |
6×18H32/40V |
12 |
$0.015/KWh |
3. Delivery time
Delivery time will be conditional to unsold production capacity. The equipment will be ready for shipment from our factory not later than 10 months after the date of signature of the SHDJICHAI Supply Contract and receipt of advance payment as defined therein.
4. WARRANTY
The warranty period shall be the earlier of (i) twelve (12) months from the commissioning or (ii) eighteen (18) months from the date of shipment.
5. VALIDITY
This offer is valid for a period of 60 days from the date of this offer.
6. REMARKS
1) All taxes and duties to be imposed are not included in our price.
2) The other terms and conditions of the contract shall be subject to mutual agreement.
CN
2013.3
|