Quotation for 2x1000kW/514rpm 440V/60Hz Gen-set and General technical specification, General technical specification, Standard Spare Parts Delivery with Gen-set, tool and documents

Quotation for 2x1000kW/514rpm 440V/60Hz Gen-set
Item	Description	Specification	Unit	Q'ty	Unit Price    USD	Total Price  USD	Remark
1	1000GF genset	1000kW/514rpm, 440V/60Hz	set	2	247,619.00	495,238.00	Tyre oil
	Incl.
	Diesel engine	G6300ZD8
	Coupling	HGT
	Alternator	TF1000
	Lube oil cooler
	HT water cooler
	Thermostatic valves
	Common base
	Foundation bolts and pad
	Exhaust expanding bellow
	Switchgear	GGD					2500A ACB
2	Gen-set Auxiliary Equipment			2	11,905.00	23,810.00
/DIV>	Exhaust silencer		PC	2
/DIV>	Exhaust gas pipe		lot	2	/DIV>
/DIV>	External Lubricating oil tank	1.5m³	PC	2
/DIV>	Cooling Tower	GBL-50	PC	2
/DIV>	Start air comressor with air reciever	CZ-20/30	PC	2
3	Auxiliary Power cabinet with battery charger	GCS	PC	1	7,143.00	7,143.00
4	Special tools		set	1
5	Standard spare parts		set	1
6	Fuel purified separator module		set	1	41,270.00	41,270.00
Total Cost						567,461.00
7	Gen-set speed control governor	Woodward 2301D+UGA	set	2	7,143.00	14,286.00	option

Technical specificaiton for 1000GF Gen-sets
1. Gen-set technical specification
No.	Item	Unit	Specification
1	Model		1000GF
2	Rated power	kW	1000
3	Rated rev.	rpm	514
4	Rated voltage	V	440
5	Rated current	A	1640
6	Frequency	Hz	60Hz
7	Power factor		0.8 (lagging)
8	Phase		3-phase 4line
9	Voltage fluctuation rate	%	±1
10	Frequency (rev.)  fluctuation rate	%	±0.5
11	Stable voltage regulating rate	%	±2.5
12	Stable frequency (rev.) regulating rate	%	5
13	Transient frequency (rev.) regulating rate	%	±20�?15
14	Stabilizing time	s	5
15	Voltage regulating method		Auto
16	Speed Governor		Mechanical hydraulic
17	Frequency regulating method		Manual
18	Lubricating method		Pressure lubricating
19	Cooling method		Close circuit of fresh cooling water
20	Coupling		Flexible
21	Painting color		Blue
22	Overall dimension	mm	6680x2350x3060
23	Net weight	kg	32500
2. Diesel engine specification
No.	Item	Unit	Specification
1	Engine Model		G6300ZD8
2	Type		In-line, 6-Cyls, four-stroke, direct injection, charged, inter cooled
3	Bore	mm	300
4	Stroke	mm	380
5	Total displacemen	L	161
6	Mean piston seed	m/s	6.33
7	Rated power	KW	1103
8	Rated rev.	rpm	514
9	Overload  (1 hr per 12 hrs)	kW/rpm	1213/514
10	Mean effective pressure	Mpa	1.65
11	Compression ratio		13:1
12	Rotation direction		Clockwise,  from flywheel end.
13	Firing order		1-5-3-6-2-4
14	Specific fuel oil consumption	g/kW.h	200+3%
15	Specific Lube oil consumption	g/kW.h	< 1.2+0.2g/kW.h
16	Smoke	RB	�?.3
17	Noise	dB(A)	105
18	Starting method		Air Rotary valve
19	Cooling system		Fresh water cooling
20	Lubricating system		Pressure lubricating
21	Fuel oil specification		Diesel oil and 180Cst/50°C HFO
22	Lube oil specification		CD40 with TBN according HFO
23	Piston lifting height	mm	2600
24	Overall dimension	mm	4740x1580x2800
25	Net weight	kg	17500
3. Alternator specification
No.	Item	Unit	Specification
1	Alternator Model		TF1000
2	Type		Brushless  generator
3	Rated power	kW	1000
4	Rated voltage	V	440
5	Rated current	A	1640
6	Frequency	Hz	60
7	Power factor		0.8 (lagging)
8	Working condition		Continuous
9	Phase and connection		3-phase, 4 line
10	Voltage regulation method		Brushless, self excited AVR
11	Insulation Class		F
12	Protection Class		IP23
4 Cooling tower specification
No.	Item	Unit	Specification
1	Cooling tower model		GBL-50
2	Inlet temperature	°C	60
3	Outlet	°C	35
4	Base Plane Size	mm	Ф2500×3310
5	Blade amount		4
6	Fan diameter	mm	Ф1250
7	Motor fan power	kW	3
8	Inlet pipe demension	mm	DN100
9	Outlet pipe demension	mm	DN150
Remark:
1. Rating for marine genset are based on the standard environment conditions�?nbsp;                                                                                      Ambient temperature: 45°C                                                                                                                                                    Total barometric pressure: 100kPa                                                                                                                                         Charge air coolant temperature: 32°C                                                                                                                                      Relative humidity: 30%                                                                                                                                                             If the test ambient conditions are not same as the standard ambient conditions, the power and fuel consumptions should be revised according to ISO-3046. 　/DIV>
2. The Gen-set is allowed to run continuously or intermittently with 110% rated power for 1 hour every 12 hours.
3. The Tyre oil needs to be treated before entering the engine. The standards for clean oil should be fit, water content less than 0.2 Vol %, solid particles content less than 50mg/kg and size should less than 10μm.

Standard Spare Parts Delivery with Gen-set
Item	Part Code	Part Name	Qty	Remark
1	G-01-027	摇臂座螺�?/DIV>	1
		Bolt of rocker arm frame
2	G-01-037	阀nbsp; �?/DIV>	2
		Valve cap
3	G-01-038	�?nbsp; �?/DIV>	2 sets
		Valve collet
4	G-01-041	气阀外弹�?/DIV>	4
		Outer valve spring
5	G-01-042	�?�?阀/DIV>	2
		Intake valve
6	G-01-043	进气阀���?/DIV>	4
		Intake valve guide
7	G-01-047	气阀内弹�?/DIV>	4
		Inner valve spring
8	G-A01-072	�?�?阀/DIV>	2
		Exhaust valve
9	G-01-207	顶架调节螺钉	2
		Adjusting screw for valve pushed holder
10	G-01-212	调节螺钉	1
		Adjusting screw
11	G-01-218A	顶架硬块	2
		Balance block
12	GB/T 6171-86	�?nbsp; �?nbsp; M24×2	1	用于气阀调节
		Nut		Used for adjusting valve lash
13	GB/T 6173-86	�?nbsp; �?nbsp; M18×1.5	1	用于气阀顶架调节
		Nut		Used for adjusting valve  lash
14	G-03-003	气缸套封水圈	3
		Water-seal ring for cylinder liner
15	G-03-013C	�?�?�?/DIV>	30
		Water-seal ring
16	G-03A-015	气缸盖垫�?/DIV>	1
		Cylinder head gasket
17	G-03-016	气缸套垫�?/DIV>	1
		Cylinder liner copper-shim
18	G-03-033	凸轮轴承 (�?	1
		Camshaft bearing (in cap)
19	G-03-034	凸轮轴承 (�?	1
		Camshaft (in body)
20	G-04-003	�?nbsp; �?/DIV>	3sets	用于主轴承和连杆轴承
		Bearing metal		main and crank pin bearing
/DIV>	/DIV>	/DIV>	/DIV>	/DIV>
Standard Spare Parts Delivery with Gen-set
Item	Part Code	Part Name	Qty	Remark
21	G-04-034	�?�?�?/DIV>	1set	/DIV>
		Thrust ring		/DIV>
22	G-04-088	顶高螺栓	6	/DIV>
		Jackingbolt		/DIV>
23	300-05-12	第一、二道活塞环	2	Chrome-plated
		No.1 and No.2 compression ring
24	G-05F1-003A	第三、四道活塞环	2	/DIV>
		No.3 and No.4 compression ring		/DIV>
25	G-05F1-100	螺旋撑簧油环	2	/DIV>
		Oil scraper ring		/DIV>
26	G-10B-100	排气管垫片组�?/DIV>	3	/DIV>
		Exhaust pipe gasket sub-assy		/DIV>
27	G-10B-600	气缸盖排气口垫片组件	2	/DIV>
		Gasket  for exhaust port of cylinder head		/DIV>
28	G-10B-700	增压器进口垫片组�?/DIV>	2	用于VTR251增压�?/DIV>
		Turbocharger inlet gasket sub-assy		VTR251 turbocharger
29	G-36-008	�?nbsp; �?/DIV>	2
		Washer
30	G-44-B500A	高压油管组件	1
		Injection pipe sub-assy
31	G-45-005	出油阀���?/DIV>	1	/DIV>
		Delivery valve spring		/DIV>
32	G-45-006A	密封垫圈	2	/DIV>
		Seal washer		/DIV>
33	G-45-011	柱塞弹簧	2
		Plunger spring
34	G-45B-100B	柱塞偶件	2 sets
		Plunger with barrel couple
35	G-45B-200	出油阀���?/DIV>	2sets
		Delivery valve sub-assy couple
36	G-46-05	�?nbsp;�?/DIV>	2
		Washer
37	G-46-09	�?nbsp;�?/DIV>	2
		Washer
38	G-46-200	喷油嘴偶�?/DIV>	2sets	/DIV>
		Injection nozzle couple		/DIV>
39	GJG-02-105	O型密封圈	2
		O-shape seal ring
40	GJG-02-106	O型密封圈	2
		O-shape seal ring
Standard Spare Parts Delivery with Gen-set
Item	Part Code	Part Name	Qty	Remark
41	Q/NDJ66-95	�?nbsp; �?10	20	Belong  to  assy G-46
		Washer
42	Q/NDJ66-95	�?nbsp; �?nbsp; 12	10	Belong  to  assy G-10
		Washer
43	Q/NDJ66-95	�?nbsp; �?nbsp; 14	5	Belong  to  assy  G-46
		Washer
44	Q/NDJ66-95	�?nbsp; �?nbsp; 16	5
		Washer
45	Q/NDJ66-95	�?nbsp; �?nbsp; 20	5
		Washer
46	Q/NDJ66-95	�?nbsp; �?nbsp; 22	5
		Washer
47	Q/NDJ66-95	�?nbsp; �?nbsp; 24	5
		Washer
48	Q/NDJ66-95	�?nbsp; �?nbsp; 27	5
		Washer
49	Q/NDJ 301-95	球面管节 6	4
		Spherical pipe joint
50	Q/NDJ302-95	螺母 M6	4
		Connecting nut
51	Q/NDJ305-95	单管接头 6	4
		Mono  siphonium  joint
52	Q/NDJ63-95	管接头体 6	1
		Pipe  joint  body
53	Q/NDJ65-95	螺栓 M10 × 1	1
		Hinged  bolt
54	GB/T3452.1-92	O型密封圈Φ47.5×3.55	6
		O-shape seal ring
55	G-67A-000	调压阀���?/DIV>	1set	随机附件
		Adjusting pressure valve  assy		Engine accessory
56	G-69-000	高压空气滤清器部�?/DIV>	1set	随机附件
		High pressure air filter  assy		Engine accessory
57	/DIV>	增压器备件箱	1	原有箱子
		Spare parts case for turbocharger		Original case
58	G-03-B702	温度接头	2
		Tempercture joints
59	G-03-B703	压力接头	2
		Pressure joints

Special tool
Item	Code	Name	Qty	Remark
1	GJG-01-100N	Tool for mounting and dismantling valve collet	1
2	GJG-01-210	Manual lapping tool for intake and exhaust valve	1
3	GJG-01-300	Tool for dismantling fuel injector	1
4	GJG-01-400	Lift tool for cylinder head	1
5	GJG-01-600	Socket wrench for cylinder head nut	1
6	GJG-01-700	Hydraulic tension tool for cylinder head bolt	4
7	GJG-02-100	Hydraulic tension tool for pull-rod bolt	2
8	GJG-02-200	Socket wrench for pull-rod nut	1
9	GB825-76	Screw M10	1
10	GJG-03-100	Stripper for cylinder liner	1
11	GJG-04-100	Stripper for main bearing cap	1
12	GJG-04-201	Socket wrench for main bearing nut	1
13	GJG-04-300N	Spanner for main bearing bolt of the flywheel end	1
14	GJG-05-100	Tool for mounting piston	1
15	GJG-05-200	Lift tool for piston	1
16	GJG-06-101A	Socket wrench for connecting-rod nut	1
17	GJG-06-102	Wrench stick	1
18	GJG-07-100N	Tool for dismantling main bearing bush	1
19	GJG-07-200N	Tool for dismantling main bearing bush	1
20	GJG-07-300	Socket wrench for flywheel nut	1
21	GJG-07-500	Dismantling tool for main bearing bush of rear end	1
22	GJG-07-600	Tool for dismantling connecting-rod bearing bush in case of that piston doesn’t need to be lifted	1
23	GJG-07-700	Socket wrench for gear nut of crankshaft rear end	1
24	GJG-07-800	Assistant wrench for flywheel nut	1
25	GJG-07-900	Tool	1
26	GJG-12-300N	Tool for mounting and dismounting camshaft	2
27	GJG-12-500N	Hydraulic tool for mounting cam	1
28	GJG-46-100N	Setting plate for mounting fuel injector	1
29	GJG-57-100	Mooned wrench for adjusting nut of injection pump tappet	1
30	GJG-57-200	Adjusting stick for injection pump tappet	1
31	GJG-57-300	Prize for injection pump tappet	1
32	GJG-57-400N	Mooned wrench for delivery valve nut	1
33	SD-1-00	Manual high pressure pump	2
34	G-08N-000	Manual barring device	1
35	8G-88A-00	Tester for fuel injection pressure	1
36	/DIV>	Camshaft meter	1
37	GJG-45B-100	Dismantling tool for delivery valve	1
38	GJG-B58A-000	Stripper for water pump impeller	1
39	GJG-81-100N	Tool for lift	1
40	GB825-88	Screw	1	Lift for flywheel

Documents
Item	Name	Qty	Remark
1	Operating Manual for Model 1000GF1-2 diesel generating set	1
2	Operating manual for series G300 diesel engine	1
3	Operating manual for TF generator	1
4	Product factory certificate	1
5	Part list with drawings for series G300 diesel engine	1
6	Operating manual for governor	1
7	Operating manual for turbocharger	1
8	Operating manual for temperature control detector	1
9	Operating manual for fuel filter	1
10	Operating manual for lube oil filter	1
11	Gen-set Form E certificate	1