4.12.1.1 DG electricity system
The generator adopts digital integrated relay protection system for monitoring and protection.
A DMR362 digital integrated relay is installed on generator switchgear, which is used for alternator protection, switch control, monitoring, measuring, display and SOE record.
The following functions are configured on the relay:
- Differential current
- Reverse power
- Instant trip current
- Voltage locked over current:
- Over current
- Over load
- Earth failure
- Over voltage
- Under voltage
- Low frequency
- Over frequency
5. Main equipments specifications
5.1 Diesel engine:
Model |
GN8320ZD8 |
Type |
Inline, four-stroke, direct injection, turbocharged, and after cooled |
Quantity |
20 sets |
Rated power |
2206kw |
Rated speed |
600r/min |
Bore/stroke |
300/380mm |
Starting method |
Compressed air |
Cooling system |
Open water cooling |
Dimension |
5620×1620×2760mm |
Weight |
25000kg |
Manufacturer |
|
Main parts of G8320ZD8 Diesel Engine
a. ABB turbocharger
b. WOODWARD electrical governor
c. GEA after cooler and lube oil cooler
a. Flexible coupling
5.2 Alternator
Model |
TFW-900 |
Type |
Brush-less synchronous alternator |
Quantity |
20 sets |
Rated power |
2500KVA |
Rated speed |
600r/min |
Rated voltage |
6600V |
Frequency |
50HZ |
Power factor |
0.8 lagging |
Insulation class |
F/F |
Excitation |
AVR |
Dimension |
3480×2150×2150mm |
Weight |
16000kg |
Manufacturer |
|
5.3 Diesel Generator
Model |
400GF1-2 |
Quantity |
1set |
Power rating |
400KW |
Rated speed |
1000rpm |
Rated voltage |
400V |
Rated current |
722A |
Power factor |
0.8 (Lagged) |
Frequency |
50Hz |
Phase |
3 phase 4 wires |
Diesel engine |
N8160ZD |
Alternator |
1FC5 454-6TA42-Z Siemens |
Cooling method |
Radiator |
Dimension |
5320×1668×1920 |
Net weight |
8500Kg |
Manufacturer |
NBo zhongceGroup Co., Ltd |
5.4 Cooling tower
Model |
GBL-100 |
Quantity |
20 sets |
Cooling capacity |
100M3/H |
Inlet water pressure |
34 kpa |
Temperature reduce |
5�?0�?/DIV> |
Fan power |
5Kw |
Net weight |
1800kg |
Manufacturer |
Zj Lianfeng |
5.5 S9-1250/11/0.4 station transformer
Type |
S9-1250/11/0.4 |
Rating |
1250KVA |
Primary Volts |
11KV |
Secondary volts |
0.4KV |
Insulation level |
Standard |
Quantity |
1 set |
Manufacturer |
Shandong Modern Dachi |
5.6 Station batteries and battery charger panel
Model |
PGD7-�?180-220 |
Quantity |
1 set |
AC input voltage |
450Vac±20% |
DC output voltage |
24V, 220V |
DC output current |
A |
Storage battery capacity |
300Ah/100Ah |
Accuracy of voltage regulation |
Max. ±0.2% |
Accuracy of current regulation |
Max. ±0.2% |
Ripple factor |
Max. 0.1% |
Power factor |
Min. 0.93 |
Efficiency |
Min. 95% |
Noise |
50dB |
Dielectric strength |
2000V 1 min without breakdown |
Operation environment |
Temperatur:-10 to 45�? Relative humidity:not greater than 90% at 20±5�?/DIV> |
Interface |
RS485, RS232 & RS422 |
High frequency rectifier module |
Emerson HD22020 3pcs |
PLC |
SIEMENS S7-200 |
LCD display screen |
HITECH PWS 5.7�?/DIV> |
Rectifier module |
Emerson HD2205 3pcs |
Maintenance-free lead-acid battery |
A400-180/12V 18 pcs |
Overall dimensions (LxDxH) |
800x800x2200mm 3pcs |
Manufacturer |
Zj Sanch |
5.7 Heavy fuel oil separator module
Model |
DHKY470 module |
Quantity |
4 sets |
Rating treatment L/h |
5000 |
Light phase output pressure: MPa |
0.2MPa |
Motor power KW |
3P/400V/50Hz/18.5kw |
Material medium |
Heavy fuel oil 380cSt |
Manufacturer |
Nj Luzhou |
5.8 Lube oil separator module
Model |
KYDH204CD-23 module |
Quantity |
5 sets |
Rating treatment L/h |
2000 |
Centrifuge Temperature |
90-98�?/DIV> |
Light phase output pressure: MPa |
0.2MPa |
Separator motor |
11kW |
Sludge pump |
1.5kW |
Power source |
3P/400V/50Hz |
Material medium |
Lube oil CD40 |
Manufacturer |
Nj Luzhou |
5.9 Exhaust Gas Boiler
Model |
GFL112-0.7 |
Rate steam capacity: |
1 T/H |
Quantity |
4sets |
Steam pressure: |
7Bar |
Steam temperature |
170�?/DIV> |
Safe pressure |
0.75Mpa |
Heating area |
112m2 |
Boiler back pressue |
Max. 220pa |
Waste gas inlet temperature |
350�?/DIV> |
Waste gas outlet temperature |
200�?/DIV> |
Overall dimensions DxH |
2350x5770mm |
Weight |
8900kg |
Manufacturer |
|
5.10 Common Circulating & Booster module
Model |
KHVU-C-10-C |
Qty |
3 sets (two work, one for standby) |
Fuel feed capacity |
10 m3/h |
Fuel circulating capacity |
20m3/h |
Fuel supply pressure |
0.6Mpa |
Fuel feed pressure |
0.6Mpa |
Max. fuel temperature |
135�?/DIV> |
Min. Fuel feed rate |
50M3 |
Rated fuel temperature rise |
4-5�?min |
Viscosity before engine inlet |
9-13 cSt |
Viscosity deviation |
±1.5cSt |
Viscosity steady time |
Max. 3.5 mins |
Viscosity control accuracy |
Max. 3% |
Primary filter |
80 mesh/inch2 |
Fine filter |
Max. 10-30µ |
Power source |
3P 400V 50HZ |
Power |
30kW |
Load |
15kW |
Manufacturer |
|
for more on HFO diesel generator power plant or gensets, click.
|