1) Motor Starting Duty (If any) :- We have rolling mills. The (If yes, please provide details wherever possible) maximum size of the motor is 750
HP DC having a full load current of 1006 Amp. When it starts from standstill it takes @ 1600 Amp + current.
2) Furnace application :- We have 3 No. Foil
Annealing Furnace. 1350 KW
3) Non-linear Thyristor Loads, if any :- Thyristor drives - Yes
4) Any other non-standard loads, if any :-
5) Voltage requirement (3.3 / 6.6 / 11 kV) :- 3.3 KV ( my existing feeder is 22 KV incoming and Step down to 3.3 KV )
6) Water Availability :-(Sufficient - Cooling Towers, Scarce - Radiators)
If Yes in case of C1, C2 and / or C3 above Annexures - I. II and III (Page 5 of 8, 6 of 8 & 7 of 8) shall be filled also. In case of Non-linear loads please provide harmonics analysis report also.
INFORMATION ABOUT THE CLIENT (PURCHASER / OWNER COMPANY)
1) Contact Person & Designation :-
Office Address / Telephone / Fax # -- –Electrical Industries Ltd
2) Name / address / Tel. of Consultant (if any) :- NA
3) Annual Turnover of the Company :-Plant @ 168 Cr
4) Main Product and installed capacity :-Aluminum. foil & Packaging Products
5) Location of the Site :- Kalwa - Thane
6) Availability for proposed Power plant at site :-
7) Contact Person at Site :- As Above Address / Telephone / Fax #
8) Whether power requirement is for :- Existing Plant existing plant /expansion project / new project
9) Duty structure :-(EPCG / EOU / Project Import / IPP)
10) Project Implementation Schedule :- FY 07-08 (Power Out - month / year)
11) Mode of Financing the Project :-
12) Type of Offer Required :- Budget + Firm (Feasibility Study / Indicative / Budget / Firm)
13) Cost of existing Power
(a) From Grid including Maximum. Demand Charges :- @ Rs. 4.4 per Unit
(b) Generated from other source :-
(DG / TG etc.)
