Item |
Ken Gen Technical Specifications |
Nature of Deviation by KERUI |
Reason of Deviation by KERUI |
Remark |
1.0 |
 /B> |
DRILLING PROGRAM |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Kenya Electricity Generating Company Limited (KenGen) has embarked on an ambitious drilling program to drill several geothermal wells. KenGen therefore intends to purchase a new 1500 HP (minimum) electric land rig complete with all accessories such as drill string tubulars, fishing tools, directional drilling equipment, air-drilling package, well cementing equipment package, mechanical handling equipment and vehicles. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The rig is required to drill deep geothermal wells within fractured volcanic formations and will be required to meet the following minimum hole and casing program. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
1.1 |
20�?Conductor casing |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
26�?hole shall be drilled to a depth of up to 80 meters; the hole shall be cased with 20�?94 lb/ft steel casing back to the surface; this casing shall be cemented back to the surface. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
1.2 |
13-3/8�?Anchor casing |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
17-1/2�?diameter hole shall be to between 300 to 450 meters; the hole shall be cased back to the surface with 13-3/8�?54.5 lb/ft grade K55 steel casing; this casing shall be cemented back to surface. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
1.3 |
9-5/8�?Production casing |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
12-1/4�?diameter hole shall be drilled to a depth of about 500 to 550 meters and the hole will be kicked off and drilled directionally to a measured depth of about 1500 meters; the hole shall cased back to surface with 9-5/8�?47 lb/ft casing; this casing shall be cemented back to surface. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
1.4 |
8-1/2�?Open hole |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
8-1/2�?diameter hole shall be drilled to measured depth of about 4500 meters; the hole shall be cased with 7�?26 lb/ft slotted liner extending up from the total depth to the 9-5/8�?casing shoe and run on a drill pipe. The slotted liner will not be cemented. |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The wells will be drilled with a water based bentonite mud or water only or aerated drilling fluids. |
 /FONT> |
 /FONT> |
 /FONT> |
2.0 |
 /B> |
MAIN RIG EQUIPMENT |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
2.1 |
Rig Rating |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
|
a) Nominal depth with 5�?x 19.5 lb/ft, grade G105, range II drill pipe shall be 5,000 meters |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Capable of running 9-5/8�?x 47 lb/ft casing to 1500 meters with 50% overpull capacity |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Have a minimum racking capacity for 5000 meters of 5�?x 19.5 drill pipe. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Have a minimum of 1500 input horse power on the drawworks |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2 |
Main Rig Specifications |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
2.2.1 |
Drawworks |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The specifications of the drawworks (certified to API 7K) are: |
YES, Model: JC50D(KERUI BRAND) |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Input Horsepower Rating: 1500 HP |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Hoisting speeds: Four (4) |
YES, 4 Forward Gear &4 Reverce Gear |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Drive: Two (2) Electric motors complete wit accessories |
YES, Two (2) YZ08 Electric Motors, Rated Power:800KW,50HZ; Rated Speed:970rpm; |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Auxiliary electric brake |
YES, FDWS50(Air cooling),Max. Braking torque:75000N.m,Exciting Power:15KW,Exciting Current:40A |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Brake Control and Cooling systems respectively |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) Drum grooving: 1-3/8�?with lebus |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) Nominal Rating (Depth Range): 4000-5000 m vertical |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
h) Crown and floor saver system |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.2 |
Mast |
JJ450/45-K (KERUI BRAND) |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The minimum specifications of the mast are: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Open front type mast certified to API 4F and API 8C |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Clear height: 148ft; Base width: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Nominal capacity: 1,000,000 lbs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Static hook load capacity (with 10 lines strung):Approximately 800,000 lbs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Wind resistance with rated setback: 100 mph |
 /B> |
Rated setback: 80 mph; Without setback capacity�?00mph |
 /FONT> |
 /B> |
 /B> |
f) Racking capacity: 5000 metres of 5�?drill pipe and 300 metres of 6 ½ �?drill collars |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) 450 ton crown Block |
YES�?/B>TC450,Max. Hook load:4500KN,Pully OD: Ø1524mm�?0"�? Pully quantity: 7PCS, Wire-line Dia.:Ø35mm (1-3/8"); |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
h) Casing stabbing board and deadline anchor |
YES�?/B>Model:YFZ20/5,Jaw Dia.:5"�?0"�?The max. lifting height: 5M�?nbsp; Lifting Weight:200Kg,Max. Flow:14L/min,Rated Pressure:16Mpa The Anchor Model:JGZ41,Max. deadline tension:410KN,The load of the 12 lines strung:4920KN |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
i) Vapor proof and explosion proof electric lighting lamps preferably Rig-A-lite or equivalent |
YES�?/B>(KERUI BRAND) |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The mast shall be designed to accommodate a Top Drive, preferably a Tesco unit. The cost of the Top Drive will be quoted separately and KenGen reserves the right to include or exclude the Top Drive in tender award. |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.3 |
Substructure and Accessories |
DZ450/10.5-S (KERUI BRAND) |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
To accommodate the mast, drawworks, electric drive group, rotary beams, rotary table, etc. The API 4F certified substructure and accessories shall include but not limited to: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Substructure overall height: Approximately 30 feet |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Clear height under Rotary beams: Approximately 25 feet |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Setback capacity: Approximately 600,000 lbs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Rotary capacity: Approximately 800,000 lbs |
YES�?/B>(Rotary table load capacity�?,305,000 lbs�?B> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Equipped with BOP handling system, hydraulic drill line spooler etc. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) Equipped with rig skidding system (beams, jacks etc) to allow multi -pad drilling |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) Complete set of rig matting for substructure and mud pumps |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
h) Pipe racks, 30 ft long x 3 ft high, 6 pieces |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.4 |
Rig Power Plants (Generator Sets and Electrical System) |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
To include generating units and accessories for a 1500hp land rig. These will include SCR Control modules to provide power to rotary table, drawworks and mud pumps�?nbsp; DC electric motors. The system will also include engine/generator control cubicles, synchronizing system, ground detection system, hand-off circuit, power limit system, SCR PLC cubicle, Driller’s console and foot brake, Drawworks dynamic brake, voltage feeder and motor control centres for powering other auxiliary AC motors, etc. |
YES�?/B>Four(04) sets CAT3512B Generator sets�?BR>The Rated Output Power�?200KW�?BR>The Rated Voltage�?00V�?0Hz�?500RPM,SCR-MCC Room; |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The generators to be supplied should provide electrical power output at 600 V, 3 phase, 50 HZ. All other auxiliary motor driven loads will be rated 415 V, 3 phase and 50 HZ while lighting loads will be rated at 240 V, single phase and 50 HZ. |
YES,One(01) set VOLVO Generator�?00KW�?0Hz |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The rig lighting system shall be complete with Rig-A-Lite system (or equivalent) covering all areas such as the mast, rig floor, pipe rack area, engine, mud pumps and tanks areas. The lamps shall be vapor proof, explosion proof and well secured to endure mast and general rig vibrations. |
YES, Rated Voltage�?220V�? phase�?BR>Rated Frequency�?50Hz Explosion-proof grade�?be used for dⅡBT4 Place; |
 /FONT> |
 /FONT> |
 /B> |
2.2.5 |
Rig Air Compressors and Accessories |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Two (2) Air Compressors, (approximate capacity- 257 CFM at 125 PSIG, 400 GAL vertical and horizontal receivers (2), 11 HP cold start electric start system and Drier). It will be the responsibility of the Supplier to ensure that adequate air supply is available to operate the drilling system instrumentation. |
|
Two(02) sets Screw comressors :SULLAIR LS12-50HH Rated Exhaust Pressure:145psi�?MPa), Nomina1 Displacement:232gal/min Air Dryer:SRC-240 Cold-start air compressor:Volume flow:35.3cfm,Exhaust pressure:1MPa(143PSI.) Air Tank�?40gal*2; Air tank�?50gal |
 /FONT> |
 /B> |
2.2.6 |
Main dimensions |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) The complete rigs, including normal cementing equipment set up, tubular lay down areas, supervisors shacks and mechanics shop should have a site space requirement of about 120 metersx 80 meters. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) The mast shall have sufficient height to handle treble tubular racking |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) The distance from the ground level to the underside of the substructure beams shall be not less than twenty five (25) feet. This is critical in accommodating the 13-5/8�?Double Ram BOP, 13-5/8�?annular BOP, drilling spool and the 13-5/8�?Rotating Head (for air drilling operations). |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.7 |
Diesel Engines |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
All diesel engines must be suitably rated for operation at an altitude over 2000 meters above sea level preferably with turbo charging. Caterpillar engines are preferred. |
YES, Four(04) sets CAT3512B Generator sets�?BR>Rated Output Power�?200KW�?BR>Rated Voltage�?00V�?0Hz�?500RPM; |
 /FONT> |
 /FONT> |
 /B> |
2.2.8 |
Mud Pumping Equipment |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The mud pumping equipment shall comprise but not limited to the following: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Mud pumps: Two (2) Triplex mud pumps, each rated at 1600 input horsepower complete with the following: - rod lubricating pumps, Strainer cross, pulsation dampener, jib crane, stroke counter, safety relief valves, 6-½ï¿½?liners, rotary hoses, pressure gauges, discharge hoses etc. |
YES, F-1600, Rated power:1600HP,Rated Strock Frequency:120Spm�?Max. WP:5000Psi,Max. Cylinder Dia.:180mm,Min. Cylinder Dia:130mm, Suction port:12"Flange,Discharge port :5" Flange; |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Motor pump drives |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Electric motors |
YES, Four(04) sets DC Motors,YZ08DC, the rated power :800KW�?0HZ, rated rotary speed:970rpm |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Super-Charging centrifugal pumps and suction manifold |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Supply of 6 sets of liners, spare valves, springs and repair kits for pulsation dampener |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) Two submersible pumps (for re-circulating water from the ponds back to the mud tanks) |
YES, Gorundfos Water pump: Two(02) sets�?BR>SP30-20, Flow capacity �?0m3/h �?BR>Pressure head�?55m�?BR>Power�?8.5KW |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) Any other consumables to maintain the pumps for two years. |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.9 |
High Pressure Mud Piping |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
High pressure (5000 psi WP) piping system for two pumps and dual standpipe, 5,000-psi jumper and rotary hoses. The stand pipe shall be rated to 5,000 psi complete with 4�?x 5,000 psi Gate valves, 2�?x 5,000 psi gate valves and Cameron Type D (or equivalent) pressure gauge range 0 to 5,000 psi. |
YES, Double Standpipe:DN�?" WP�?5Mpa Rotary Hose�?"�?5Mpa�?5ft |
 /FONT> |
 /FONT> |
 /B> |
2.2.10 |
Mud System |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Mud systems (capacity approximately 1600 bbl) �?shaker, intermediate, suction, mixing and water tanks. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Mud agitators. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Trip tank, degasser and choke manifold. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Solids control equipment �?shale shakers, desander, desilter, vacuum degasser and mud mixing pumps. Cooling Tower, 800 GPM, Temp. in �?85 deg. C, out �?35 deg. C (Electric motor driven) |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.11 |
Instrumentation |
M/D Tcotco |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Drilling instrumentation system to measure, record and display critical drilling and mud parameters shall be provided. The instrumentation shall include but not limited to the following: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) 24 Hour Drilling Rate Recorder (Geolograph) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
A manual geolograph with 6 �?nbsp; 8 pens and 24 hour charts shall be provided. An electronic geolograph (computer display) alone will not be adequate and hence not be acceptable in absence of a manual geolograph. The electronic geolograph shall have shock proof rubbers t, o cushion it from rig vibrations. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The recorder shall include but not limited to the following: |
 /B> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
penetration rate |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
weight (weight on bit and total string weight) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
pump pressure |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
pump strokes per minute |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B><, /B> |
rotary table torque |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
rotary table revolutions per minute (RPM) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Weight Indicator (mechanical). |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Driller’s Console Instrumentation (RPM, Rotary Torque, Mud Pump Stroke Sensors, Return mud flow transmitter, Drawworks ROP/Height Sensor, Pit level transmitter, Hook load transmitter, Tank level transmitter, Instrumentation rig up and cables, Flow Line Pressure, Flow Line Temp etc). |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Deviation Instruments. Totco Double recorder 0 �?8 degrees or equivalent. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Any other instrument necessary for the Driller’s Console. |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.12 |
Hoisting Equipment (Traveling Equipment) |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The hoisting equipment manufactured to API 8A specification shall include crown block, traveling block, hook; swivel, elevator links, Kelly, Kelly saver subs, Kelly valves, Kelly cocks (upper and lower) etc with the following ratings and sizes: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Crown block: load capacity: 450 ton |
YES,TC450,Max. Hook load: 4500KN,Pully OD:Ø1524mm�?0"�?Pully Quantity:7, Wire-line Dia:Ø35mm (1-3/8") |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Travelling block: load capacity: 450 ton |
YES,YC-450, Max. Hook Load:4500KN�?BR>Pully Quantity: 6�?nbsp; Pully OD:Ø1524mm�?0"), Wire-line Dia:Ø35mm |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Hook: 450 ton |
YES, DG-450 Max. Hook Load:4500KN�?BR>Hook Mouth Opening Size:220mm Mouth Dia of Main Hook:180mm, Mouth Dia of Sub-Hook:120mm�?nbsp; |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Swivel: 450 ton |
YES, SL-450 Max. Static Load:4500KN�?BR>Max. WP:35MPa�?BR>center tube Dia:75mm�?BR>Connector thread:Connect with the Kelly 6-5/8"REG-LH�?nbsp; Max. Rotary Speed:300rpm |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) 2-3/4�?x 72�? 350 ton elevator links |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) 2-1/4�?x 84�? 250 ton elevator links |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) 2 pieces per rig of API 5 ¼â€™ï¿½ nominal size hexagonal Kelly, 40 feet long with 3 ¼â€™ï¿½ bore, 6 5/8�?Reg 7 ¾â€™ï¿½ OD top connection, and NC 50, 6 1/8’� OD bottom connection. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
h) Kelly spinner: Varco 6600 or equivalent air operated with maximum torque 1200 ft-Ibs at 110 rpm free spinning. |
YES, be included in the Swivel (LANZHOU CHINA) |
 /FONT> |
 /FONT> |
 /B> |
2.2.13 |
Rotary Tables and Drives |
YES, Model:ZP375 Rated Static Load:5850KN�?BR>Max. Rotary Speed:300rpm Max. Working Torque:33000N.m Opening Dia.:952.5mm�?7-1/2"�?BR>Transmission ratio:3.56 |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The rotary table and drives shall be as follows: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Rotary table with 27 ½ï¿½?or 37 ½ï¿½?opening built to API 7K specification. |
YES, Rotary table with 37 ½ï¿½?opening built to API 7K specification |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Independent rotary table drive, two-speed |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Electric motor |
YES, One (01) set DC Motor YZ08DC Rated Power:800KW�?0HZ Rated Rotary Speed:970rpm |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Master bushing with insert bowls for 20�? 13-3/8�? 9-5/8�?nbsp; and 7�?nbsp; casing and built to API 7A specification. |
YES,One (01) set 20�?nbsp; casing bushing�?1-3/4"-13-3/8"�?-5/8"-10-3/4"�?-3/8"-8-5/8"sub-bushing(with liner),One(01) set per size |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Kelly drive bushing for 5-1/4�?API Hex Kelly (two units). |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.14 |
Top Drive (optional) |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
AC electric top drive unit, preferably Tesco, c/w accessories with the following minimum ratings: |
YES, Tesco Top Drive�?00ECI900�?BR>Rated Power�?00HP Max. Rotary Speed�?93RPM |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) 500 ton hoisting capacity |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) 50,000 lb-ft drilling torque at 100 rpm |
 /FONT> |
33000 lb-ft drilling torque at 100 rpm |
 /FONT> |
 /B> |
 /B> |
c) 75,000 lb-ft connection torque |
 /FONT> |
36700 lb-ft connection torque |
 /FONT> |
 /B> |
 /B> |
d) 50,000 lb-ft braking torque |
 /FONT> |
56,000 lb-ft braking torque |
 /FONT> |
 /B> |
 /B> |
e) 7,500 psi working pressure |
 /FONT> |
5,000 psi working pressure |
 /FONT> |
 /B> |
2.2.15 |
Rig Floor Tubular Handling Equipment |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Complete set of rig floor tubular handling equipment shall be provided for drill pipes, drill collars, casing and shall include but not limited to the following: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Casing Tools: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Casing-handling equipment is required for 7�? 9 5/8’�, and 13 3/8’�, 20�?nbsp; API coupled casing. Equipment shall include but not limited to the following: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
1. Single joint pick up elevator 20�?�?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
2. Single joint pick up elevator 13-3/8�?�?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
3. Single joint pick up elevator 9-5/8�?�?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
4. Single joint pick up elevator 7�?�?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
5. Side door elevator 20�?�?2pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
6. Side door elevator 13-3/8�?�?2pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
7. Side door elevator 9-5/8�?�?2pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
8. Side door elevator 7�?�?2pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
9. Slips for 20�?casing �?1pc 20�?/FONT> |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
10. Slips for 13-3/8�?casing �?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
11. Slips for 9-5/8�?casing �?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
12. Slips for 7�?casing �?1pc |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
13. Elevator 350 tons with adapter plate and segment for casing �?1 set |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
14. Spider 350 tons with adapter plate and segment for casing �?1 set |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
15. Casing protector for 20�?clamp on type �?2 pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
16. Casing protector for 13-3/8�?clamp on type �?2 pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
17. Casing protector for 9-5/8�?clamp on type �?2 pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
18. Casing protector for 7�?clamp on type �?2 pcs |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
19. Casing power tongs �?1 set complete with jaws for 7�? 9-5/8�?and 13-3/8�?nbsp; |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
20. Manual tongs �?1 set |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
21. Casing clamps �?1 set |
 /B> |
Casing Safty Slips-1pair�?/B>WA-C3 1/2�? 20�?/B> |
 /FONT> |
 /B> |
 /B> |
22. Casing drift for 7�?casing �?1 set |
YES |
 /B> |
 /FONT> |
 /B> |
 /B> |
b) Drillpipe, Collars: |
 /FONT> |
 /B> |
 /FONT> |
 /B> |
 /B> |
The drill pipe and drill collar rig floor handling tools shall be but not limited to the following: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
1. Drill collar elevator size 8�?nbsp; - 1 pc |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
2. Drill collar elevator size 6 ½ï¿½?�?1pc |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
3. Elevator for 5�?drill pipe �?2pcs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
4. Elevator for 4 ½ï¿½?drill pipe �?1 pc |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
5. Elevator for 3 ½ï¿½?drill pipe �?1 pc |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
6. Slips for 8�?drill collar �?2 pcs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
7. Slips for 6 ½ï¿½?drill collar �?2 pcs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
8. Safety clamp for drill collars �?1pc |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
9. Drill pipe power tong �?1pc complete with jaws for 3-1/2�?4-1/2�?and 5�?drill pipe. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
10. Manual tongs �?2 sets |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
11. Bit breakers for 17-1/2�? 12-1/4�?and 8-1/2�?rock bits. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Any other facilities required at the rig floor for complete handling of the tubulars shall be included by the Supplier. |
 /B> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) 7�?OD, 26 lb/ft casing running spear with NC50 box up connection. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The spear is connected to the drill pipes and it is used for running the 7�?OD slotted liners (casing) into the hole after attaining the total depth of the well. After landing the liners on well bottom, the spear is unlatched from casing and pulled out of the hole. |
 /B> |
 /FONT> |
 /FONT> |
 /B> |
2.2.16 |
Blowout Preventer System |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Equipment offered shall withstand aerated drilling fluids and saturated steam conditions within the nominal ratings specified. This shall comprise 5,000-psi blowout preventers with closing unit and choke manifold. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Requirements per rig: |
 /B> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) One (1) only 21 ¼â€™ï¿½ Annular BOP x 2000 psi |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) One (1) only 21 ¼â€™ï¿½ x 2000 psi Ram-type BOP fitted with CSO (blind gates) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) One (1) only 13 5/8’� Annular BOP x 5000 psi |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) One (1) only 13 5/8’� x 5000 psi Double Ram-type BOP fitted with Complete Shut Off (blind) and 5�?drill pipe rams |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
One set of 9-5/8�?OD casing rams shall be provided to fit in item (d) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) BOP/Accumulator control unit (Koomey Type 80 or equivalent) |
FKQ800-7(SHANFHAI SHENKAI�?/FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
enetration rate |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Working pressure: 3000 psi |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Tank capacity: about 120 gallons |
|
Tank capacity: about 175 gallons |
 /FONT> |
 /B> |
 /B> |
Complete with remote control system |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) Kill and choke line manifold |
YES, JG103-65/35,Main Nominal Dia.:103mm�?-1/16"),Pressure:5000PSi YG103-65/35,main Nominal Diz.:103mm�?-1/16"),Pressure:5000PSi |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) BOP test facility |
YES, KB16Pneumatic high-pressure test pump, The maximum test pressure:140MPa |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
h) BOP handling facility |
YES, FY-50Y,2×250KN |
 /FONT> |
 /FONT> |
 /B> |
2.2.17 |
Drilling spools |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Sufficient , 2000 psi drilling spools shall be provided to allow for drilling hole sizes for 26’�, 17½ï¿½? 12 ¼ï¿½?and 8½â€™ï¿½ and running casing sizes from 20’�, 13-3/8�? 9-5/8�?nbsp; and 7’� respectively. Spools shall incorporate side outlets for kill and choke lines |
YES, One(01) set 20" casing bushing�?3-3/8"sub-bushing (with liner�?9-5/8" sub-bushing (with liner�?2-3/8"-8-5/8" sub-bushing (with liner�? one set per size. |
 /FONT> |
 /FONT> |
 /B> |
2.2.18 |
Mud Circuit |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
2.2.18.1 |
Capacity: Approximate total storage capacity shall be a minimum of 1,600 barrels with suitable tank divisions and delivery manifolds to accommodate mud pill mixing independent of normal drilling fluid. The mud system will include the following: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Shaker tank |
YES, 860bbl |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Intermediate tank |
YES, 280bbl |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Suction tank |
YES, 345bbl |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Mixing tank |
YES, 170bbl |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Water tank, total capacity approximately 160 M3. |
YES, 80m3X2 |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
f) Combination Trip tank, Poor Degasser and Choke Manifold Skid. |
YES, 15m3,with Desander and the skid of the hock manifold |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
g) Standard duty Worm Gear Mud Agitators |
YES, Mud Mixer�?BR>Fifteen(15) sets HA15: motor power:15KW, impeller diameter:1000mm Two(02) sets HA7.5: motor power:7.5KW,impeller diameter:800mm One (01) set HA5.5:motor power:5.5KW,impeller dia:600mm |
 /FONT> |
 /FONT> |
 /B> |
2.2.18.2 |
2.2.18.2 Solids handling: Desanders and desilters shall be capable of handling approximately 5500 litres/min. Shale shakers should preferably be dual type capable of handling approximately 4000 litres / min each side. |
YES, One (01) set desander:HD-300X3, Nominal diameter of cyclone:12"×3 Capacity:360m3/h screen mesh size:1240×585mm screen mesh size:150�?00mesh Motor power: 0.5KW One(01) set desilter:HM-100X16 Nominal diameter of cyclone:4"×16 Capacity:210�?40m3/h screen mesh size:1240×585mm screen mesh size:150�?00mesh Motor Power:0.5Kw |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The Desanders and desilters system will include the following: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Desander Horizontal, 3 Cone. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
b) Desilter Assembly, 16 Cone. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
c) Linear motion shale shaker. |
YES, Two (02) shaker ,HS280-3P Motor power:2×2.2Kw screen mesh size:3×833×1150mm�?BR>vibration strength:7.2g Screen adjustment range:-2° �?+6° |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
d) Vacuum Degasser mounted on Oil field skid including explosion proof motor, starter, suction and discharge piping and jet nozzle. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
e) Mud laboratory complete with mud balances, testing kits etc. |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.19 |
Water tanks |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
160 M3 Water tanks and centrifugal pumps. |
YES,Water tank:80m3X2, Two sets water pump:SP30-20: Discharge�?0m3/h �?BR>Pressure head�?55m�?BR>Power�?8.5KW |
 /FONT> |
 /FONT> |
 /B> |
2.2.20 |
Fuel Storage |
YES, Capacity�?0m3,40m3+3m3 |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Sufficient on-site storage shall be provided for a minimum of 10 days operation of the rig and aeration equipment. Fuel filtering system and transfer pumps shall be included. |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.21 |
Safety Equipment |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
a) Fire extinguisher and safety equipment for rig site |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
150 lb wheel mounted, dry chemical fire extinguisher 1 |
 /FONT> |
165 lb wheel mounted, dry chemical fire extinguisher�?PCS. |
 /FONT> |
 /B> |
 /B> |
20 lb CO2 fire extinguisher |
 /FONT> |
15 lb CO2 fire extinguisher �?PCS. |
 /FONT> |
 /B> |
 /B> |
30 lb dry chemical fire extinguisher |
 /FONT> |
27 lb dry chemical fire extinguisher �?0PCS. |
 /FONT> |
 /B> |
 /B> |
H2S Gas continuous monitoring system |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Derrickman (Mast) escape line and chair |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
One (1) Hand held H2S Gas Detector |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Two (2) Safety Belts for mast climbing |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
One (1) Emergency eye wash station |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.22 |
Welding and Cutting Tools / Equipment |
 /B> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Welding and cutting Tools for two rigs |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Heavy duty oxygen-acetylene welding set and cutting tools |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Diesel driven welding machine (Lincoln SAE 400 or equivalent) |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Electric welding machine |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
Wireline cutter |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.23 |
Rig Site Offices and Accommodation Facilities |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
The following facilities are desired: |
 /FONT> |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
1. Dog House �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
2. Workshop �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
3. Store house �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
4. Office for Tool Pusher with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
5. Office for Drilling Engineer with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
6. Office for Directional Drilling Engineer with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
7. Office for Aerated Drilling Engineer with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
8. Office for Maintenance Engineer with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
9. Office for Rig Geologist with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
10. Office for Drilling Supervisor with two (2) beds, toilet and shower �?1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
11. Dormitory for eight people �?with 8 beds, toilet and shower. �?2 units |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
12. Meeting room/ dining room - 1 unit |
YES |
 /FONT> |
 /FONT> |
 /B> |
2.2.24 |
Base (Rig) Camp |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
ase camp for about 75 people comprising of: |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
1. Engineers/Superintendents accommodation�?each with two bedrooms (2 beds per room.), toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
2. Supervisors/Technicians accommodation �?each with two bedrooms (2 beds per room), toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
3. Workers accommodation �?each with 8 beds, toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
4. Geologists/Reservoir Engineers accommodation�?each with two bedrooms (2 beds per room.), toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
5. Consultants/Ad hoc Specialists accommodation�?each with two bedrooms (2 beds per room.), toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
6. Cementing/Services crew accommodation �?each with 8 beds, toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
7. No of dining rooms |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
8. No of kitchens with storage |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
9. Toilet and shower unit - approximately 6 toilets and 6 showers |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
10. Offices �?providing two office spaces. |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
11. Camp Manager/Cateress accommodation �?each with two bedrooms (2 beds per room), toilet and shower |
YES |
 /FONT> |
 /FONT> |
 /B> |
 /B> |
12. Cement laboratory c/w accessories |
YES |
 /FONT> |
 /FONT> |