|
item |
description |
|
1 |
THERMOCOUPLE , --:
TYPE:
K;
TEMPERATURE RATING:
95 TO 1260 DEG C;
JUNCTION:
SINGLE UNGROUNDED;
WIRE SIZE:
1.5 MM;
DESIGN LENGTH:
2 M AND 400 MM;
SHEATH DIAMETER:
2.5 MM;
SHEATH MATERIAL:
SSTL;
CONNECTION:
COMPRESSION;
MOUNT:
1/4 IN MNPT;
ADDITIONAL DATA:
FOR WHEEL SPACE STAGE 1 AFT OUTER, FOR
WHEEL SPACE TEMP MONITORING GE GAS
TURBINE-MS7001EA GT NO: 8 AND 9 GT SER
NO: 296856, 296857.
GENERAL ELECTRIC-GEN PURPOSE
P/N# 351A3488P021
GENERAL ELECTRIC-GEN PURPOSE
P/N# 514310-21
AMETEK INC/PLYMOUTH PRODUCTS
P/N# 8TR1AAH1
WHEEL SPACE |
|
8 |
RELAY , TIME DELAY:
OPERATION:
0.5 TO 5 SEC;
CONTACT RATING:
115 VAC;
CONTACT ARRANGEMENT:
1NO1NC;
CONTACT:
SILVER PLATED;
ACTION:
1P2T;
COIL VOLTAGE:
115 VAC;
TERMINAL:
SCREW;
MOUNT:
SURFACE;
ENCLOSURE:
SEALED;
ADDITIONAL DATA:
FOR GENERATOR PROTECTION OF GE GAS
TURBINE 5001.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# GE888A142A1
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 888-41241 |
|
9 |
GASKET , SPIRAL WOUND:
PIPE SIZE:
6 IN;
SIZE:
7-1/4 IN ID X 9-7/8 IN OD X 3/16 IN TH;
PRESSURE RATING:
300 LB;
OUTER RING MATERIAL:
CSTL;
FILLER MATERIAL:
ASBESTOS;
WINDING MATERIAL:
SSTL;
STYLE:
FLEXITALLIC CG;
ADDITIONAL DATA:
FOR PIPING ARRANGEMENT COOLING AND
SEALING AIR, FOR GE GAS TURBINE MS7001B
AND E, TURBINE UNIT NOS: 4 TO 7 AND 13
TO 18, TURBINE SER NOS: 248908 TO
248911, 282395 TO 282398 , 282483 AND
242484, ML NO: 909, P/L NO:
887E0542G001.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 255A4880P36
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 302A4594P36 |
|
11 |
GASKET,SPIRAL WOUND:
PIPE SIZE:
3 IN;
SIZE:
4 IN ID X 5-7/8 IN OD X 1/8 IN TH;
PRESSURE RATING:
600 LB;
OUTER RING MATERIAL:
CSTL;
FILLER MATERIAL:
ASBESTOS;
WINDING MATERIAL:
304 SSTL;
STYLE:
FLEXITALLIC CG;
ADDITIONAL DATA:
3/4/600 ASME, FLEXITE SUPER 4 X 4-23/ 3
2 X 3/16, 3-300 CASE, COMB-OUT WRPR, PI
PE FLANGE GASKET, FOR FUEL OIL SYSTEM A
ND ATOMIZING AIR COMPRESSOR PIPING ARRA
NGEMENT COOLING AND SEALING AIR, GE GAS
TURBINE MS5001P/MS7001E.
AEG-KANIS:
P/N#0956043
AEG-KANIS:
P/N#0923045
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#226A1049P30
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#255A4880P65
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#302A4594P065
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#302A4594P31
FLEXITALLIC GASKET CO., INC.:
P/N#3" 300-400-600API601 |
|
ENQ NO.SMT A -407 BID DUE DATE 13/06/2010 |
|
1 |
VALVE,BUTTERFLY:
SIZE:
4 IN;
OPERATED:
LEVER;
BODY MATERIAL:
CI;
ADDITIONAL DATA:
VICTAULIC V040700SE0 LINED, GE-MS7001B.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#262A3123P3
GE - MS7001B |
|
15 |
GASKET , --:
TYPE:
SEAL;
SIZE:
OVERALL DIMENSIONS: 150 MM DIA X 220 MM
WD X 220 MM LG X 0.2 MM TH;
MATERIAL:
PAPER;
SHAPE:
IRREGULAR;
ADDITIONAL DATA:
FOR DC EMERGENGY SEAL OIL PUMP STG4.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 4626-03-IDP-025B
APPLIC: DC EMERGENGY SEAL OIL PUMP STG4 |
|
ENQ NO.SMT Z-499 BID DUE DATE 13/07/2010 |
|
1 |
OIL FILTER:
SIZE:
6"
GE
21157 P
4626-BM D
353A1655 D
(FILTER#1 & 2), 150LB
RF FLANGED CONNECTION
APPLIC: LUBE OIL SYSTEM OF CC3-STAGE IV
DWG#: 4626-BM |
|
2 |
SCREW , CAP:
DIAMETER:
1-1/4 IN;
THREADS:
8 TPI;
LENGTH:
5 IN;
HEAD:
FLANGED DOUBLE HEX;
MATERIAL:
ASTL;
SPECIFICATION:
C1A3;
ADDITIONAL DATA:
3-3/4 IN THREAD LG, EXTERNAL WRENCHING,
HEAD MARKED 'CR', TEMPERATURE
RATING:1050 DEG F/566 DEG C, FRAME
EXHAUST ASSEMBLY, FOR MAJOR INSPECTION
OF GE GAS TURBINE UNITS 18 AND 19, UNIT
SER NO: 296856, 296857, GE - MS7001E
UNIT NO: 8 AND 9 MAD PP
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# N733BP44080
FRAME EXHAUST ASSEMBLY, BOLT HEXAGONAL
FLANGE DOUBLE HEX EXTERNAL WRENCHING
APPLIC: SPARES FOR MAJOR INSPECTION OF
GE GT UNITS 18 & 19 |
|
3 |
RETAINER , --:
TYPE:
CROSS FIRE TUBE;
SIZE:
(88 MM X 128 MM) WD X (127 MM X 250 MM)
LG X (3.5 MM X 4 MM X 11 MM) TH;
MATERIAL:
STL;
ADDITIONAL DATA:
WITH 62 MM DIA SLOT, FOR CROSS FIRE
TUBE DWG NO: 188D4719G001, FOR
COMBUSTION SYSTEM OF GE GAS TURBINE
MS7001B AND E, GE UNIT NO: 4 TO 8, 13
TO 18, GE SER.NO: 248908 TO 248911,
282395 TO 282398 282483 AND 282484.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 158A6501P001 |
|
4 |
RETAINER , --:
TYPE:
CROSS FIRE TUBE;
SIZE:
(88 MM X 128 MM) WD X (127 MM X 250 MM)
LG X (3.5 MM X 4 MM X 11 MM) TH;
MATERIAL:
STL;
ADDITIONAL DATA:
WITH 62 MM DIA SLOT, FOR CROSS FIRE
TUBE DWG NO: 188D4719G001, FOR
COMBUSTION SYSTEM OF GE GAS TURBINE
MS7001B AND E, GE UNIT NO: 4 TO 8, 13
TO 18, GE SER.NO: 248908 TO 248911,
282395 TO 282398 282483 AND 282484.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 158A6501P001 |
|
5 |
PICK-UP , --:
TYPE:
MAGNETIC;
SIZE:
1 IN DIA X 2-7/8 IN LG;
ADDITIONAL DATA:
CABLE- (3) 10 FT AND 6 IN, RATING: -65
TO 100 DEGC, 95V RMS/270V P-P 0.05 MA,
TEMP CODE: T3C, CLASS: I GRADE A, B, C,
D II GR E, F, G, FOR TURBINE SPEED GE
MS7001EA SER NO: 296856, 296857, UNIT
NO: 8 AND 9, MAD PP SER NO: 296859, TAB
POWER PLANT.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# G054601
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
DWG#351A3236P001
AIRPAX PROTECTOR GROUP/AMERICAN PHILIPS
P/N# 70085-1010-422
MAG PICKUP, TURB SPEED
APPLIC: TURBINE SPEED
GE-MS7001EA |
|
6 |
SCREW , CAP:
DIAMETER:
1 IN;
THREADS:
8 UNC;
LENGTH:
8-1/2 IN;
HEAD:
FLANGED DOUBLE HEX;
MATERIAL:
ASTL;
SPECIFICATION:
C1A3A;
ADDITIONAL DATA:
8-7/8 IN OVERALL LG, 3-1/4 IN THREAD LG
TEMPERATURE RATING : 500 DEG F / 260 DE
C, GE CAT NO: G107067V, FOR MAJOR
INSPECTION OF GE GAS TURBINE UNITS 18
AND 19, SER NO:296859/60/61/62
GE-MS7001EA TURBINE NO:296048 TABOUK PP
UNIT NO: 8 AND 9 MAD PP UNIT SER NO:
296856, 296857.
GENERAL ELECTRIC-GEN PURPOSE
P/N# N733P39128 |
|
7 |
THERMOCOUPLE , --:
TYPE:
K;
TEMPERATURE RATING:
95 TO 1260 DEG C;
JUNCTION:
SINGLE UNGROUNDED;
WIRE SIZE:
1.5 MM;
DESIGN LENGTH:
2 M AND 400 MM;
SHEATH DIAMETER:
2.5 MM;
SHEATH MATERIAL:
SSTL;
CONNECTION:
COMPRESSION;
MOUNT:
1/4 IN MNPT;
ADDITIONAL DATA:
FOR WHEEL SPACE STAGE 1 AFT OUTER, FOR
WHEEL SPACE TEMP MONITORING GE GAS
TURBINE-MS7001EA GT NO: 8 AND 9 GT SER
NO: 296856, 296857.
GENERAL ELECTRIC-GEN PURPOSE
P/N# 351A3488P021
GENERAL ELECTRIC-GEN PURPOSE
P/N# 514310-21
AMETEK INC/PLYMOUTH PRODUCTS
P/N# 8TR1AAH1
WHEEL SPACE |
|
8 |
RING , RETAINING:
TYPE:
EXTERNAL C;
SIZE:
41 MM ID X 48 MM OD X 1.5 MM TH;
MATERIAL:
STL;
ADDITIONAL DATA:
DC EMERGENGY SEAL OIL PUMP STG4. GE DRW
4626-03-IDP-007A
INGERSOLL-DRESSER/WORTHINGTON/FLOWSERVE
P/N# 4626-03-IDP-007A
APPLIC: DC EMERGENGY SEAL OIL PUMP STG4 |
|
9 |
RING , --:
TYPE:
PUMP;
SIZE:
36 MM ID X 47 MM OD X 1.25 MM TH;
MATERIAL:
STL;
ADDITIONAL DATA:
TYPE: "O", SPLIT HALVE , DC EMERGENCY
SEAL OIL PUMP STAGE 4.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
DWG#4626-03-IDP-005A
APPLIC: DC EMERGENGY SEAL OIL PUMP STG4 |
|
10 |
BEARING , --:
TYPE:
INTERNAL;
SIZE:
50 MM ID X 130 MM OD;
STYLE:
WITH SHAFT AND PLATE;
SERIES:
HEAVY;
MATERIAL:
SSTL;
ADDITIONAL DATA:
DIVERTER DAMPER FOR INTERNAL TOGGLE
LINKAGE OF MODEL NO: FS-7EA.
BRADEN WINCH COMPANY
DWG#5225/F05-C
APPLIC: FOR INTERNAL TOGGLE LINKAGE OF
DIVERTER DAMPER.
MODEL#: FS-7EA |
|
11 |
BEARING , --:
TYPE:
EXTERNAL SHAFT;
SIZE:
160 MM ID X 430 MM OD X 110 MM HT;
STYLE:
SHIELDED;
SERIES:
HEAVY;
MATERIAL:
STL;
ADDITIONAL DATA:
EXTERNAL STUB SHAFT AT THE NON- DRIVEN
SIDE OF THE TOGGLE TORQUE TUBE OF
DIVERTER DAMPER. MODEL NO: FS-7EA.
BRADEN WINCH COMPANY
DWG#STAND/01-6-1/2/160X430MM
APPLIC: EXTERNAL STUB SHAFT AT THE NON-
DRIVEN SIDE OF THE TOGGLE TORQUE TUBE OF
DIVERTER DAMPER.
MODEL#: FS-7EA |
|
12 |
ASSEMBLY , --:
TYPE:
BEARING,INTERNAL;
MODIFIER:
SHAFT AND BEARING;
ADDITIONAL DATA:
135 ID X 200 OD X 165 MM HT, WITH
SHAFT-100 MM DIA X 380 MM LG, FOR
INTERNAL BLADE OF DIVERTER DAMPER,
MODEL NO: FS-7EA.
BRADEN WINCH COMPANY
DWG#5225/E04
APPLIC: FOR INTERNAL BLADE OF DIVERTER
DAMPER.
MODEL#: FS-7EA |
|
13 |
GEARBOX , --:
TYPE:
DIVERTER;
GEAR RATIO:
6:1;
MOUNT:
BASE;
ANGLE:
90 DEG;
MATERIAL:
STL;
ADDITIONAL DATA:
T (EIN): 1060 NM, T(AUS): 5140 NM,
IP67,TEMPERATURE: -25 DEG C TO 80 DEG C
FOR DIVERTER DAMPERS OF GE GAS TURBINE
FRAME 7EA.
BRADEN WINCH COMPANY
DWG#5225/B01
AUMA ACTUATORS INC
GSD400/GZ35.1(6:1)
AUMA ACTUATORS INC
MODEL#GZ35.1
APPLIC: DIVERTER DAMPERS GE FS-7EA |
|
14 |
GASKET SET , --:
TYPE:
PUMP;
SIZE:
(75 MM ID X 190 MM OD X 0.5 MM TH) TO (
100 MM ID X 124 MM OD X 0.5 MM TH);
MATERIAL:
PAPER/ASBESTOS;
NUMBER OF PIECES:
4;
ADDITIONAL DATA:
BRAND NAME: KLINGER SIL C-5400,
COMPOSED OF THE FF: 4-7/8 IN 9B AND 5B
(231-11-150) 2 EACH, 7-1/2 IN 5C
(231-11-154) 1EACH, 10 IN 5D
(231-11-1051) 1EACH, FOR AC LUBE OIL
PUMP OF STAGE 4 .
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 4626-01-4013-65GKT
COMPOSED OF THE FF:
4-7/8" 9B&5B (231-11-150) 2EA
7-1/2" 5C (231-11-154) 1EA
10" 5D (231-11-1051) 1EA
APPLIC: AC LUBE OIL PUMP OF STAGE 4 |
|
15 |
SPRING:
TYPE:
DISC
SIZE:
180 X 92 X 6 MM
BRADEN MANUFACTURING
5225/F04-1 D
APPLIC: DIVERTER DAMPERS GE FS-7EA |
|
16 |
BEARING , SLEEVE:
TYPE:
BUSHING;
INSIDE DIAMETER:
30 MM;
OUTSIDE DIAMETER:
34 MM;
LENGTH:
20 MM;
MATERIAL:
STL;
ADDITIONAL DATA:
FOR DIVERTER DAMPERS GE FS-7EA.
GLACIER METAL CO
MODEL#MB30-20DU
BRADEN WINCH COMPANY
DWG#STAND/04-2-BRG
APPLIC: DIVERTER DAMPERS GE FS-7EA |
|
17 |
BEARING , --:
TYPE:
EXTERNAL SHAFT;
SIZE:
240 MM ID X 500 MM OD X 110 MM;
STYLE:
SHIELDED;
SERIES:
HEAVY;
MATERIAL:
STL;
ADDITIONAL DATA:
FOR EXTERNAL SHAFT AT THE DRIVEN MODEL
NO: FS-7EA.
BRADEN WINCH COMPANY
DWG#STAND/01-6-1/2/240X500MM
APPLIC: FOR EXTERNAL SHAFT AT THE DRIVEN
SIDE OF THE TOGGLE TORQUE TUBE.
MODEL#: FS-7EA |
|
18 |
SHIM , --:
TYPE:
SHAFT SEAL;
THICKNESS:
0.25 MM;
SIZE:
175 MM ID X 252 MM OD;
MATERIAL:
STL;
ADDITIONAL DATA:
30 MM DIA, FOR SHAFT PENETRATION
THROUGH DAMPER WALL BY LIMIT SWITCH
LINKAGE ASSEMBLY OF DIVERTER DAMPER
MODEL NO: FS-7EA.
BRADEN WINCH COMPANY
DWG#5225/C20
APPLIC: FOR SHAFT PENETRATION THROUGH
DAMPER WALL BY LIMIT SWITCH LINKAGE ASSY
OF DIVERTER DAMPER.
MODEL#: FS-7EA |
|
ENQ NO.SMT A -400 BID DUE DATE 26/06/2010 |
|
1 |
KIT,--:STYLE:2ND STAGE TURBINE;TYPE:NOZZLE ARRANGEMENT;APPLICATION:GAS TURBINE;ADDITIONAL DATA:CONSISTS OF THE FOLLOWING:DIAPHRAGMS SET # SMO0688086 (1), NOZZLE # SMO1734472 (1),STL MATERIAL. FOR GE GAS TURBINE MODELMS5001P, UNIT # 4, 5 AND 6, REFER TO SE
RIAL # 05811412-06103 AND NUOVO PIGNONE
-MS5001, REFER TO SERIAL# 05811 & 05812.,
NUOVO PIGNONE:
P/N#SMO1734471
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#112E6849G001
INCLUDES
DIAPHRAGMS SET SMO0688086 1
NOZZLE SMO1734472 1
ASSEMBLY ON TURBINE
NUOVO PIGNONE-MS5001
SERIAL# 05811 AND 05812 |
|
2 |
GASKET , --:
TYPE:
COMBUSTION CHAMBER;
SIZE:
90 MM ID X 190 MM OD X 2 MM TH;
MATERIAL:
GRAPHITE;
SHAPE:
ROUND;
ADDITIONAL DATA:
FOR GE GAS TURBINE MODEL # MS5001L.
NUOVO PIGNONE
P/N# KFZ326170324
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 324A9109P107 |
|
ENQ NO.SMT A -401 BID DUE DATE 26/06/2010 |
|
1 |
VALVE , --:TYPE:SERVO;PROCESS FLUID:FUEL OIL;DESIGN RATING:3000 PSI;CONNECTION:SUB BASE;BODY MATERIAL:SSTL;ADDITIONAL DATA:
SER NO: 579. FOR INSTRUMENTATION &
CONTROL.
NUOVO PIGNONE
RVO29265 65FP
MOOG INCORPORATED
G771K201
MOOG INCORPORATED
S04F0FA4B4
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS
P/N# 312A6077P002 |
|
ENQ NO.SMT A -402 BID DUE DATE 27/06/2010 |
|
1 |
TOOL , --:
TYPE:
CAULKING;
POWER:
HAND;
SIZE:
(10 MM X 33 MM X 35 MM) DIA X 800 MM LG
ADDITIONAL DATA:
NUT 16 MM, HEX 24 MM, FOR ROTOR SHAFT
BALANCING DWG NO: HTCZ620195 OF ABB GAS
TURBINE- 11D5, GAS TURBINE UNIT NO: 08
TO 12 GAS TURBINE SER NOS: 1-321 320,
1-321 330, 1-321 340, 1-334 020, 1-334
030 OF ABB GAS TURBINE 9D.
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000006665
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTCT303490R0002
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
DWG#HTCZ620195P4A
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTCT303490R2 (10 MM X 33 MM X 35 M
P/N# )
APPLIC:ROTOR SHAFT BALANCING
DWG.# HTCZ620195
ABB - 11D5
GT UNIT# 08 TO 12
GT SL# 1-321 320,1-321 330,1-321 340,
1-334 020,1-334 030 |
|
2 |
TOOL , --:
TYPE:
SCREWDRIVER;
POWER:
HAND;
SIZE:
(20 MM X 33 MM) DIA X 700 MM LG;
ADDITIONAL DATA:
M16 TIP, FOR ROTOR BALANCING OF ABB GAS
TURBINE MODEL 11D5, DWG#: 620195.
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000010447
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTGD222363R1
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
DWG#HTCZ620195P5B
ABB - 11D5 |
|
3 |
BEARING , BALL:
TYPE:
CONRAD, RADIAL;
ROW:
SINGLE;
INSIDE DIAMETER:
65 MM;
OUTSIDE DIAMETER:
120 MM;
WIDTH:
23 MM;
SERIES:
LIGHT;
STYLE:
2 SHIELDS;
RADIAL CLEARANCE:
C3;
CAGE MATERIAL:
STL;
IBI GROUP NUMBER:
14238;
SKF INDUSTRIES INCORPORATED
P/N# 6213-ZZ/C3 |
|
4 |
GASKET,--:
TYPE:
EXHAUST PLENUM;
SIZE:
185 MM WD X 2 M AND 225 MM LG X 0.5 MM
TH;
MATERIAL:
SSTL;
SHAPE:
STRIP;
ADDITIONAL DATA:
SIZE: 7-1/4 IN HT , SHAPE: IRREGULAR ,
PLNM ASSEMBLY EX GASKET FLX PL SEG AFT,
MODEL NO:1625, PL NO:935E0823G005, FOR
PLENUM ASSEMBLY EXHAUST OF GE GAS TURBI
NE MS7001B, MS7001E GAS TURBINE UNIT NO
: 8 AND 9, MAD PP , OF GT GAS TURBINE S
CR NO: 296856 AND 296857.
GENERAL ELECTRIC/DIELEKTROL/LENTRONICS:
P/N#192B3815P001 |
|
5 |
ROD,WELDING:
TYPE:
ARC;
MATERIAL:
CI;
DIAMETER:
2.5 MM;
LENGTH:
360 MM;
CLASS:
AWS ENIFE-CL;
STORAGE REQUIREMENTS:
4.5 KG PACK;
ADDITIONAL DATA:
ELECTRODE, FOR CI WELDING OF ABB GAS TU
RBINE 11D5.
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT:
P/N#UTP 86 FN
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT:
P/N#TCZ234642P1
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT:
Model#UPT FN86
ABB-11D5 |
|
6 |
ROD , WELDING:
TYPE:
ARC;
MATERIAL:
NI CR CO MO-1;
DIAMETER:
3.25 MM;
LENGTH:
350 MM;
CLASS:
AWS UTP6170CO A 5.11;
STORAGE REQUIREMENTS:
4.5 KG PACK;
STANDARD:
DIN 1736;
ADDITIONAL DATA:
ELECTRODE, SPECIAL LIME TYPE ELECTRODE
WITH HIGH NICKEL CONTENT 173 LB THOUGH
THE SIZE IS 3.25 MM X 300 MM IN THE
CATALOGUE, AT PP3, JED SIZE IS 3.2 MM X
300 MM , FOR HIGH TEMPERATURE OF ABB GA
TURBINE 11D5.; ESAB WELDING ROD; 1
PKT=4.8 KGS
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# UTP6170 CO
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000003732
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HDIW464610P320
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# UTP6170 03500586
WASHINGTON ALLOY
P/N# USA-NI-117-1/8 |
|
7 |
GASKET , --:
TYPE:
U-DUCT;
SIZE:
1900 MM ID X 1980 MM OD X 0.6 MM TH;
MATERIAL:
GRAPHOILED;
SHAPE:
ROUND;
ADDITIONAL DATA:
6 SEGMENTS PER GASKET, FOR COMBUSTION
CHAMBER & U-DUCT,ABB-11D5 GT
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000022936
KWGZ0000019202 P
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTCZ400090P1
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# TGT401557P1
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTCZ620125P22B
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000019202
WOOD GROUP PLC/HEAVY INDUSTRIAL TURBINES
P/N# PCT300268P2
WOOD GROUP PLC/HEAVY INDUSTRIAL TURBINES
P/N# HTCZ 620125P22A
HTCZ 620125P22A
ABB-11D5 GT |
|
8 |
ROD , WELDING:
TYPE:
ARC;
MATERIAL:
316L SSTL;
DIAMETER:
1.6 MM;
LENGTH:
300 MM LG;
CLASS:
AWS E316L-16;
STORAGE REQUIREMENTS:
1.65 KG/PK, 5 KG/PK;
COMPOSITION:
18% CHROMIUM, 8% NICKLE, 2.5% MOLYBDINU
M;
STANDARD:
DIN 8556;
ADDITIONAL DATA:
AS PER SUPPLIER INFO UTP 68 MOLC IS AN
ALTERNATE OF ESAB OK 63.30, CHARGE:
131337, E19 12 3 NC 26 TV 25-35 A, FOR
TURBINE ROTOR BLADING ROW- 5, ABB GAS
TURBINE- 11D5 ABB MOD - SUPRANOX316L ,
ESAB MOD - RUTOX-C/1.5X250MM , MOD -
OK63.30/1.5MM , ESAB MOD - OK 63.30 ,
BOHLER FOX MOD - EAS 4MA; ESAB WELDING
ROD; 1PKT=1.6KGS
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# D422602P8198
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HTCM420483P26
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000012560
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# UTP 68 MOLC
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# HZN451385P7
WASHINGTON ALLOY
P/N# USA-316L-1/16
BOHLER THYSSEN WELDING
P/N# E316L-17/1.5 MM
BOHLER THYSSEN WELDING
MODEL#FOX EAS 4 M-A/1.5 MM
ABB-11D5, |
|
ENQ NO.SMT A -403 BID DUE DATE 26/06/2010 |
|
1 |
PISTON , --:
TYPE:
VALVE;
SIZE:
(44 X 35) MM ID X (55 X 42) MM OD X 91;
MM LG;
MATERIAL:
STL PLATED;
ADDITIONAL DATA:
KKS NO: MBV21 R5201 R4150, FIG NO: 7201
P80, FOR CONSTANT PRESSURE VALVE OF
LUBE OIL SYSTEM DWG NO: HTCZ620344,
ABB- 09D.
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000011130
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
DWG#D402071 POS 732
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
DWG#HTCZ620344P0003
P80
APPLIC: CONSTANT PRESSURE VALVE OF LUBE
OIL SYSTEM
ABB-09D |
|
2 |
BUFFER , --:
TYPE:
COUPLING;
SIZE:
24 MM ID X 32 MM OD X 33 MM LG;
MATERIAL:
RUBBER;
ADDITIONAL DATA:
FOR GENERATOR/COOLING SYSTEM OF ABB GAS
TURBINE 9D2.
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# TCZ233740P0019
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
P/N# KWGZ0000016379
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
MODEL#NR.7
ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT
66-14781-9
APPLIC: GENERATOR/COOLING SYSTEM
ABB-9D2 |
|
03 |
SEAL , MECHANICAL: SHAFT/SLEEVE DIAMETER: 55 MM; STYLE: CA RTRIGE; DESIGN: BALANCED; ARRANGEMENT: SINGLE; ROTATING FACE MATERIAL: STL; HARDWARE MATERIAL: SSTL; SPRING MATERIAL: STL; SECONDARY SEAL: O-RING; ADDITIONAL DATA: FOR IMO PUMP. BBC (BROWN BOVERI & CO LTD/& CIE-AG) P/N# 50G 60-4 BBC (BROWN BOVERI & CO LTD/& CIE-AG) P/N# N2E 509 CR IMO PUMP G050 IMO PUMP ALG 060N3 |
|
04 |
O-RING , --:TYPE:SEAL;INSIDE DIAMETER:260 MM;OUTSIDE DIAMETER:272 MM;WIDTH:6 MM;MATERIAL:VITON;COLOR:BLACK;SERVICE: OIL; ADDITIONAL DATA: FOR FUEL OIL SYSTEM OF ABB GASTURBINE 09D2, SER NO: B-306500 UNIT NO: 01, SER NO: B-306600 UNIT NO: 02, AT TF POWER PLANT. BBC (BROWN BOVERI & CO LTD/& CIE-AG) P/N# 076909/P511A BOLL & KIRCH MODEL#161-1/80S (5901454) APPLIC: FUEL OIL SYSTEM ABB-09D2 |
|
5 |
CHART , ROLL:TYPE:RECORDER;WIDTH:120 MM; SERVICE: TEMPERATURE; SCALE: 0-650, 800-1050 DEG C; ADDITIONAL DATA: CEN 120MM CODE : 0000108 APPLIC: KS2L AMREIN RECORDER TYPE: 063438 ABB-09D2 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT MODEL#KS2L/0-650, 800-1050DEG C MISCELLANEOUS CEN 120MM CODE : 0000108 APPLIC: KS2L AMREIN RECORDER TYPE: 063438ABB-09D2 |
|
06 |
MOTOR , ELECTRIC, AC:POWER:16.5 KW;VOLTAGE:380-DELTA;PHASE:3;FREQUENCY:60;AMPERAGE:31.5 A;SPEED:2895;FRAME:160L;ENCLOSURE: TEFC;SHAFT SIZE:17 MM ID X 42 MM OD X 127.5 MM LG; MOUNT:FOOT;LENGTH:660 MM;INSULATION:F;ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT MODEL#QUXY160L2BG/16.5KW COWER FACTOR : 0.92 , CL:F IP 54 NEMA 50DEG CRT APPLIC : FOR FUEL TRANSFER PUMP ABB-9D2 & 9D1N |
|
07 |
TRANSFORMER , CURRENT:RATING:24/50/125 KV;AMP RATIO:75:5 A;FREQUENCY:50/60 HZ;ACCURACY CLASS:CL 3;BURDEN:60 VA;ADDITIONAL DATA: LOCATION: INDOOR, THERMAL CURRENT: 50 KA/SEC, IDYN: 125 KA ABB-11D5. ABBMOD AKS17.5CAO, BD-24G , DRW 4-90.163 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT P/N# HA348710 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT KWGZ0000918115 ITH= 50KA/SEC, IDYN= 125KA |
|
08 |
SCREW , SET:DIAMETER:10 MM;THREADS:1.5 MM;LENGTH:30 MM;POINT:FLAT;HEAD: HEADLESS SLOTTED; MATERIAL: STL; ADDITIONAL DATA: M10 X 30 SZ KK ST VZINKT, FOR GT-BLOCK, COMPRESSOR HOUSING DWG NO: HTCZ620145, ABB-09D2/09D1N SER NO: B-306500, UNIT NO: 01/TF PP, SER NO: B-306600, UNIT NO 02/TF PP, SER NO: 1-324810, UNITNO: 04/TF PP, SER NO: 1-324820, UNIT NO: 05/TF PP, SER NO: 1-324 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT P/N# NB323100P2868 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT P/N# KWGZ0000013131 ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT MODEL#SZ KK ST VZINKT ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT DWG#HTCZ620145P21B ASEA/ABB/BBC/PETERCEM/TEMECO/FLAKT DWG#HTCZ620145P21A M10X30 SZ KK ST VZINKT |
