Appendix " A "
Scope listing Ge Jenbacher Power Generating Facility
The grouping consists of 10 x Ge Jenbacher J616 Series generating sets and associated equipment
including two prefabricated buildings that have been in a heated storage facility since 2001 as a
result of a failed power project.

The generator sets and all associated equipment are well preserved and in very good condition.
These units and associated equipment as listed below were originally sold for approx $13,000,000 .
Current pricing is very competitive.

EQUIPMENT DESCRIPTION:

10x Jenbacher Sixteen Cylinder Vee J 616 GS N.L. 1500 rpm natural gas engines with a continuous
full load shaft output of 2000 kW, based on a LHV gas of 8,8 KW per Nm³ . The generator set is
designed to serve 50 as well as 60Hz. Between each engine and generator there is an Eichoff ANO-
090 1:1.2 gear speed increaser driving for 60Hz application. If only 50Hz is required the gear will be
removed to optimize the electrical efficiency. The electrical efficiency at 50Hz and full load will reach
41,1%
10x Stamford generators designed for 50 and 60 Hz, type rated for 3.375 kVA 400/480Volts,
directly connected to a step-up transformer. Generator voltage output can be adapted to customers
requirements.
Engine and generator base frames are included together with:

  Engine Jacket water system module
  Electric Jacket Water Preheating
  Automatic Lube oil replenishing system
  Pre lubrication and after cooling oil pump
  Main Fuel natural gas train.
  Pre chamber natural gas train.
  Piping interface flexible connections for water, gas, and lube oil.
  Ge Jenbacher - Dianne Engine Management system with monitoring and safety shut down
for auto or manual operation, Leanox misfiring detection, performance and trend tracking etc
  Ge Jenbacher - Hermes remote monitoring system enables distance control and monitoring
by telephone line and modem.
  Interface panel module
  Master control panel for 10 engines for auto start /stop of individual modules.
  2x Siemens motor control panels for operation of auxiliaries NEMA (each control 5 units)
  10x Thompson Technology Inc utility grade generator control panels for synchronizing
with the mains using plc technology and with re synchronizing automatic
built into module
  generator switchgear (Low voltage) NEMA
  Grid monitoring device
  10x Alstom step-up transformers included for 400-480 / 10.000-12.000 volt with tap
changing device for voltage adaption
  10 x GGEA Dual circuit air cooled radiators for High and Low temperature circuits �?BR>based on 40 degrees C ambient temp.
  10 x Silex critical grade Exhaust Silencers, with mounting bands, connectors and
insulation  10 x start batteries and charging rectifiers
  Engine commissioning spare parts and standard tools
 

These generating sets could easily be used as 50 Hz or 60Hz units as the Stamford generator is
switchable between 50/60Hz. The gas engine runs always at 1500rpm, for 60Hz application a
gearbox is mounted between generator and gas engine. This makes these units additionally useful
for overseas projects.

As the units are immediately available and new engine factory production generally has a minimum
of 6-month delivery capability, a client using these new - factory shipped condition - units would
have a considerable advantage for projects requiring an accelerated commissioning period.