Rosemount

For over 45 years, Rosemount has been recognized as the world leader in the design and manufacture of instrumentation,

including a complete line of pressure, temperature, flow, and level products. The base for Rosemount's success is a

commitment to product quality and reliability in the most demanding industries environments. READ LESS

Rosemount proudly provides the broadest array of pressure measurement products for pressure, flow, and level applications.

Rosemount leverages years of industry knowledge and experience to offer increased plant efficiency and safety at lower installed cost.

Whether your application is critical control, safety, or monitoring, there is a Rosemount pressure product that best meets your needs.

Thermocouples / RTDs

Common, simple, reliable temperature sensors that rely on either a millivolt signal from two dissimilar metals (thermocouples) or the resistance of a highly pure conductor (RTDs), both of which correlate highly to temperature.

Temperature Transmitters / Transducers

Provides the interface between a temperature sensor, such as a thermocouple or RTD, and the measurement/control device allowing the sensor’s signal to travel further before it distorts and creates inaccuracy.

Magmeters / Electromagnetic Flow Meters

Uses energized coils outside the flow tube to create a magnetic field which creates voltage proportional to the velocity of a conductive liquid passing through the field at a right angle.

Differential Pressure Flow Meters

Measure the velocity of fluids by reading the pressure loss across a pipe constriction. These meters can contain laminar plates, an orifice, nozzle, or Venturi tube to create an artificial constriction. Highly sensitive pressure sensors measure the pressure before and after the constriction.

Vortex Flow Meters

Uses an obstruction in the flow stream to create downstream vortices which form alternating low and high pressure zones that oscillate at particular frequencies directly proportional to the velocity of the fluid.

Pressure Sensors / Transmitters / Transducers

Converts applied pressure into a measurable electrical signal which can be used for display or to trigger a control function.

Level Switches

Point level measurement instruments used to mark a single, preset level condition such as high or low level condition that would trigger an alarm or switch.

Level Transmitters

Provides continuous level measurement over the range of the system rather than at a single point and produce an output signal that directly correlates to the level within a vessel.

Rosemount 3051S SuperModule Platform The most advanced pressure, flow, and level measurements

�?The all-welded hermetic SST design delivers the industry's highest field reliability.

�?Ultra performance provides up to ±0.025% accuracy and 200:1 rangedown.

�?Ultra for Flow performance provides up to ±0.04% of reading and 14:1 flow turndown.

�?15-year stability and 15-year limited warranty

�?SIL3 Capable: IEC 61508 certified by an accredited 3rd party agency for use in safety instrumented systems up to SIL 3 (minimum requirement of single use [1oo1] for SIL 2 and redundant use [1oo2] for SIL 3).

�?IEC 61508 Functional Safety Specifications for 3051S are detailed at Emerson.com/Rosemount/Safety.

Rosemount 3051S Coplanar Pressure Transmitter

Rosemount 3051S In-line Pressure Transmitter .

Rosemount 3051S MultiVariable Transmitter

Rosemount 3051SF DP Flow Meters

Rosemount 3051S Electronic Remote Sensor (ERS) System

Rosemount 3051S Scalable Level Transmitter