RADIAL SEALS ASSEMBLY ALONGWITH HOLDING STRIPS, BOLTS, NUTS AND WASHERS COMPLETE SET FOR REGENERATIVE AIR PRE-HEATER
Type : 26VI-1370 (Ljungstrom)
Material : C.R.L.S
Dwg. No : 3303-002
( 01 SET COMPRISES OF THE FOLLOWING PARTS )
- Cold end inner radial seal
Æ 1212x146.8x4.8mm = 12 Nos.
- Cold end inter radial seal
Æ1212x146.8x4.8mm= 12 Nos.
- Cold end outer radial seal
Æ1115x146.8x4.8mm= 12 Nos.
- Holding strip for cold end inner radial seal
Æ1200.3x102x6mm= 12 Nos.
- Holding strip for cold end inter radial seal
Æ1209x102x6mm= 12 Nos.
- Holding strip for cold end outer radial seal
Æ1025x102x6mm= 12 Nos.
- Hot end inner radial seal
Æ 1212x146.8x4.8mm = 12 Nos.
- Hot end inter radial seal
Æ1212x146.8x4.8mm= 12 Nos.
- Hot end outer radial seal
Æ1115x146.8x4.8mm= 12 Nos.
- Holding strip for hot end inner radial seal
Æ1200.3x102x6mm= 12 Nos.
- Holding strip for hot end inter radial seal
Æ1209x102x6mm= 12 Nos.
- Holding strip for hot end outer radial seal
Æ1025x102x6mm= 12 Nos.
- Nut, Bolts & Washers for Radial Seal
M16 x 45 mm = 408 Nos.
Material C.R.L.S
Note:- Radial Seals Leafs should be attached with re-in forcing strips and makes one seal |