SD6E BULLDOZER
Main Features
" Manufactured according to original drawing of Caterpillar Inc. U.S.A,
" Total interchangeable with Caterpillar bulldozer.
" Operator comfort is provided by the two-way adjustable seat, single lever dozer control with adjustable lever and combined hand-lever steering and braking.
" Logging special with Allied W6DD Winch available.
Performance Brief
" Operating weight: 15.9T
" Max. drawbar pull: 167kn
" Ground pressure (at operating weight) 52.4kpa
" Ground clearance 310mm
" Length of track on ground 2667mm
" Grade ability:
Straight 30 o
Side 25 o
Diesel Engine
" Model ------------------ Turbocharged 3306 diesel engine
" Type ------------------ Water-Cooled, single-row, vertical, 4-stroke-cycle
" Number of cylinders-bore*stroke 6-121* 152mm
" Rated engine speed 1900rpm
" Flywheel power(at 1900rpm) 115kw/155HP
" Starting 24V starter motor
" Displacement 10.5 liters
" Fuel system Direct injection with individual adjust system free injection pumps and valve
Flywheel Clutch &Transmission
" Flywheel clutch has three metallic-faced plates. Clutch lubricated and cooled by pressure-circulated oil
" Direct drive, sliding gear-type transmission with fast forward-reverse shift, forward 5 gears and reverse 4 gears , full-pressure lubrication.
/FONT>
Steering & Brake
" Hydraulically actuated, multiple-disc oil clutches require no adjustment. Oil-cooled , hydraulically-boosted contracting band brakes. Hand levers combine steering clutch disengagement and braking in one control. Brake pedals are retained for operators who prefer them. Mechanical parking brake.
Final Drives
" Crown-shaven, double-reduction final drives. floating ring seals. Sprocket with bolt-on. Replaceable rim segments. Its is easy for maintenance.
Track Roller Frame
" Box-section construction with solid inner member. Lifetime lubricated rollers and idlers. Adjustable, 2 positions idler.
" Number of rollers (each side) 7
" Oscillation at front idler 292mm
ROPS Canopy
ROPS(Rollover Protective Structure) offered by SHEHWA for this machine meets ROPS criteria : SAEJ 39 �?SAE J 1040a and ISO 3471. It also meet FOPS ( Falling Object Protective Structure )criteria: SAEJ231 and ISO 3449.
Sealed and Lubricated Track
" Sealed and lubricated track surrounds the track pin with lubricant to greatly reduce internal bushing wear. Lubricant is held in place by a dealing arrangement consisting of a polyurethane seal, a rubber load ring and a thrust ring. Hydraulic track adjusters. aNumber of shoes(each side) 39
" Width of standard shoe 560mm
" Track gauge 1880mm
Hydraulic Controls
Two optional systems are available, complete system consists of pump, tank, filters , valves, linkage and control levers anticavitation valve is included with bulldozer controls. System available are as following:
" One valve (internal) for bulldozer position: raise, hold, lower, float.
" Two valve (both internal) for bulldozer and tilt cylinder, tilt cylinder position: tilt lift, tilt right,hold
" Pump: gear-type; Capacity: 17 liters/min(at 6859kap); Relief valve setting: 11518kpa; Drive: Geared from auxiliary drive
Service refill capacities
" Fuel tack: 295 liters
" Cooling system: 38 liters
" Diesel engine crankcase : 27.4 liters
" Transmission, bevel gear and steering clutch compartments: 98 liters
" Final drives (each) : 18.9 liters
/FONT>
Winch ( Supplied by Allied system company of (U.S.A) (optional)
" Driven by coupling the transmission and the winch mainly used for log-skidding , pipe-
laying etc.
" Model: HYSTER-ALLIED W 6F
" Weight (without cable and fairlead) 934kg
" Speed reduction ratio(standard model): 1:45
/FONT>
Specifications For Blades
|
Blade type |
Width |
Height |
Digging Depth. |
Ground clearance |
Max. Tilt |
|
Angled |
3880mm |
924mm |
464mm |
967mm |
330mm |
|
Straight |
3210mm |
1127mm |
441mm |
1012mm |
680mm |
