16V4000L64FNER   

1. MTU genset MTU 16V4000GS (16V4000L64FNER), lurtxxjharged, gas-fired mtornal combustion engine for lean-mix operation and synchronous generator designed to generate 11kV 50 Hz. alternator model Stamford HVSI 804 T2 Wdg83. 3-phase eleclncity; digital voltage regulator, without heat recovery and oxidation catalyst! The total eleclncai output for the generator is 2026 kW(e) @pf 1.0 in grid parallel operation when operating with natural gas. Methane Number > 80, air inlet temperature of 30°C- 40®C and mixture cooling water Inlet temperature of 58°C. Data for each gen set Electrical output 2,026 kW 1.948 kW (measured at the generator terminals) at power factor =1.0 grid parallel operation max continuous in island mode with MN 80 fuel Item 2 Item 3 Thermal output HT 1,173 kW 8% tolerance (Engine cooling I lube oil / stage mixture cooler) Thermal output LT (2°d stage mixture cooler) 93 kW 8% tolerance Energy input 4,622 kW 5% tolerance Continuous operation at rated load as per ISO 3046 ICFN, not to be overloaded, referenced to operation parallel to the mains; altitude of the installation site 100 m above mean sea level. Site rating al max. 40°C combustion air temperature, 58°C mixture coolant temperature, relative humidity 60% at 35eC air temperature and Methane Number of > 80 for each genset A tnal run using natural gas will be conducted at MTU ONSITE ENERGY factory for each genset as it is completed, including measurements of exhaust gas pollutants NOx and CO. Emissions: NOx <500ing/Nm» (@5% 02) CO�?<800mg/Nm, (@6% 02)

2. MIP 4000 V3 9 Interface panel Genset base frame mounted control and monitoring panel, function and equipment as per Technical Descriptions MS61042 & MS13095. Panel dimensions 1000(w) x 760(h) x 210(d) mm Supply without air conditioning for max. installation room temperature of 40°C. Cables between MIP and generator extended by 1 m, allowing to install MIP at the container wall

3. N/A (without MMC)

Annex 1-Scope of Supply and List of Component

Items 5 & 7 of Schedule 1

Engine coolant pre-heating system per genset,electrically powered, 400/230V, approx. 9 kW.

Item4

Item 5

Engine exhaust gas connection with 90° elbow for horizontal outlet.

Set(s) of documentation

Item 6

Operating manual, maintenance manual, spare parts list, workshop test protocol, in English language;1 x Hardcopy and 1 x CD-Rom for each genset.

Gas train, delivered loose: MTU OEG Standard in accordance with the European Pressure

Item7

Equipment Directive, incl. a hose to connect the gas line to the genset, packed separately. Grid parallel operation.

Item8

Set(s) of flexible connections

Item9

packed separately for connection to the peripheral piping, comprising:- jacket water hoses with flange connectors - mixture cooling water hoses with flange connectors -oil hoses with union nuts

-exhaust gas compensator with flange connector

Item 10

DSL-Box for Remote Monitoring (hardware only)

For connection at customer site for remote monitoring, DSL connection including modem at site to be provided by customer.

Item 11

Preservation

Standard corrosion protection of the genset/module for transport and extended

storage is max. 12 months from notification of readiness for dispatch. The preservation period is subject to closed packing, dry and normal storage conditions:frost-free,closed and heated rooms,clean

I

storage temperatures between min. 10 �?and max. 40 ℃monthly average relative air humidity s 65%

For other storage conditions(incl.construction period) pls. refer to MTU specification A001070.

Item 12

Packing: Genset unpacked, MMC on pallet, gas train & accessories packed in carton/wooden box. One spare set of lube oil filters

Item 13

Fast Start capability is not included. Optional delivery to be agreed upon request with following

Item 14.

modifications(mixture cooling water inlet temperature of 45°C):

a) 7 min Fast Start option: Big pre-lube oll purnp with 5.5 kW el. motor and fast start software. b) 2 min Fast Start option: Big pre-lube oil pumpwith 5.5 kW el. Motor, fast start software and

Turbocharger with specific diffusor and nozzle ring.