A set of flexible tubing equipment (hoses) for the Terminal.

Equivalent: LTCAT571 and LTCAT572 hoses

Products designation

Wire-framed oil-filling hoses, diam. 12 inches, intended for operation under low temperatures (-50°C) and designed for up to 21 bar working pressure.

Purpose

Designed to transport commercial oil, stable condensate, or a mixture thereof from the Terminal via two parallel lines through the end valve (“Pusnes�?type) to the tanker under low temperature conditions

Shall provide for the hose connection to the other hose or connection piping and shall ensure securing of the flexible hose sections to the ends of the hose.

Technical characteristics

The technical characteristics of the hoses shall comply with the design solution (be the authentic unit or equivalent) as described in Appendices 1 and 2.

suggested: 

Hose with reinforced armored ends 12”x35�?devaiation list  

BASE HOSE SPEC STANDARD DEVIATION DATA (Hose option 2,PTFE inner layer hose)  

LENGTH(m) 10.7 NO DEVIATION  

PRIMARY BURST PRESSURE(min) 105BAR NO DEVIATION  

PERMITTED AXIAL LOAD 267kN NO DEVIATION  

RESISTANCE TOPRESSURE DROPS 13.8bar NO DEVIATION  

RESISTANCE TOLOCAL LOADS 47.5kN/m2 NO DEVIATION  

MAX. FLOW RATE 15m/SECOND 21M/SECOND  

MIN. BEND RADIUS 1.2M NO DEVIATION  

AMBIENT TEMPERATURE RANGE -50---+52C NO DEVIATION  

PRODUCT TEMPERATURE RANGE -50---+70C -50---+80C(PTFE layer crude oil connected)  

MAX. CONTENT OFAROMATIC HYDROCARBONS 25% 100%(PTFE layer)  

TYPE OFHOSE COVER NITRILE Orange color TPU(better resistance for oil,UV,Ozone)  

ELECTRIC CONDUCTIVITY Continuous NO DEVIATION  

PIPE DEIMENSIONS  

HOSE INTERNAL DIAMETER 305mm 302mm  

OUTSIDE DIAMETEROF A 550mm 480mm  

OUTSIDE DIAMETEROF B 450mm 416mm  

OUTSIDE DIAMETEROF C 570mm 495mm  

HOSE STIFFNESS CHARACTERISTICS TORSION MOMENT When empty Under pressure 21 bar  

AXIAL LOAD 250kN/m2 11500kN 17250kN NO DEVIATION  

BEND (HOUSING) 15kN/m2 50kN/m2  

BEND (FLAT END) 20kN/m2 65kN/m2  

BEND (ARMORED FLAT END) 25kN/m2 80kN/m2  

DATA ON THE TERMINAL DEVICE  

FLANGE TYPE-ASME CLASS #300 FF NO DEVIATION  

NUMBER OF BOLT  

OPENINGS ON THE 16 NO DEVIATION  

FLANGE  

FITTING LENGTH 660mm NO DEVIATION  

BOLTS DIAMETER 1.125m 1.125 inch  

HOSE MASS / THERMAL CONDUCTIVITY 10.7m  

WEIGHT IN AIR, EMPTY 1300kgs 1510kgs  

WEIGHT OF THE UNDERWATER  

PART WHEN COMPLETELY FILLED 550kgs 535kgs  

WITH SEA WATER  

AVERAGE HEAT TRANSFER COEFFICIENT 58W/u NO DEVIATION  

Hose with GMPHOM2009