320kW(400kVA) Open type Diesel generator

engine: Weichai WP13D385E201

Alternator: Shanghai Stamford GR314G

controller: SmartGen HGM6110

TERMS AND CONDITIONS:

* Trade terms: EXW China

* Shipment port: Shenzhen port China

* Destination port: any port as you require

* Package: Plastic film

* Year of manufacturer: 2023 full brand new

* HS code of 400KVA diesel generator: 8502131000

* Country of origin: China

* Payment term: 30% deposit by T/T before production, 70% balance by T/T before shipment

* Delivery Time: Within 20 working days after receiving deposit

* Warranty:1 year or 1,000 running hours quality warranty after delivery, whichever comes first.

* Remark: The above quotation includes: muffler, 24V DC maintenance free battery,battery cable, battery charger, mains

circuit breaker, shock absorber pad, factory test report, random data set, etc.

*Quotation validity period: 15 days

Output Power 400kVA Diesel Generator Set Specifications

Diesel Generator Data

Main Technical Data of Diesel Engine:

Main Technical Data of Alternator:

Operating Environment:

SmartGen Control System

Model�?/span> HGM6110 Origin: China Automatic controller

HGM6110 series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote�?(remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.

Below shut down causes are included:

Low Coolant Level High coolant temperature Low oil pressure Low output frequency Electricity

High output frequency Low output voltage High output voltage Low Fuel Level Emergency stop

Main characteristics are as following:

132x64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;

Acrylic screen, improved wearable and scratch resistance property;

Silica-gel panel and keys can well adapt to higher and lower temperature;

RS485 communication port enables “three remote�?functions via MODBUS protocol;

CANBUS port which can be connected to ECU with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port;

Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz system;

Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; Mains

Generator

Line voltage (Uab, Ubc, and Uca) Phase voltage (Ua, Ub, and Uc) Frequency Hz Phase sequence

Line voltage (Uab, Ubc, and Uca)

Phase voltage (Ua, Ub, and Uc)

Frequency Hz Phase sequence Load

Current �?/span>A,�?/span>�?/span>IC Each and total active power kW Reactive power kvar Apparent power kVA Power factor PF

Ge�?/span>e�?/span>ato「accumulated energy kWh

Output percentage with load %

For mains, genset has functions of over/under voltage and loss of phase; For gens, genset has functions of over/under voltage, over/under frequency, over current and over power;

Precision measure and display of parameters about engine;

Temp. (WT)         °C/°F

Oil pressure (OP)         kPa/psi/bar

Fuel level (FL)     %      Fuel remains L

Speed (SPD)       r/min

Battery Voltage (VB) V

Charger Voltage (VD) V

Accumulated running hours

Accumulated start times

Control and protection function: Automatic start/stop of genset, load transfer (ATS control) and perfect fault display and protection;

With ETS, idle control, pre-heat control, speed raise/drop control, all of them are relay outputs; Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also adjusted through USB interface (or RS485 interface) via PC;

Multiple sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;

Multiple conditions of crank disconnect (speed, oil pressure, frequency) can be selected;

With emergency start function;

With flywheel teeth numbers automatic identification function;

Power supply range: (8〜35)VDC, accommodating to different starting battery voltage environment;

All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;

With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;

Event log, real-time clock, scheduled start & stop function (can be set as start unit once a day/week/month whether with load or not);

Add rubber gasket between shell and controller screen, the waterproof can reach IP65;

Controller is fixed by metal fixing clips;

Modular design, flame-retardant ABS shell, pluggable terminal, embedded mounting, compact structure and easy installation.