Proportional pressure control valve
Nominal diameter 2
Air piloted seat valve
_ Air piloted proportional pressure valve
_ Reliable, rugged design
_ Excellent accuracy
_ IP 65 environmental protection in normal position
Technical data
Medium:
Oil free, dry air, filtered to 5 μm
Output pressure:
0,2�?,0 bar, 0,2�?,0 bar, 0,2�? bar (2 wire version)
0,14�?,0 bar, 0,14�? bar (3 wire version)
Flow capacity: Up to 300 Nl/min
Air consumption:
<4 bar: 0,85 l/min typical
>4 bar: 1,75 l/min typical
Operating pressure:
At least 0,7 bar above maximum required output pressure
Connections: G1/4
Operating temperature range: -20 to +70 °C
Response time:
<2 bar: less than 0,5 s for 10 �?90% step change
>2 bar: 2 s for 10 �?90% step change
Total error:
±0,5 % of span (typical, indepentdent error includes the combined effect of non-linearity, hysteresis, deadzone and repeatability)
Temperature effect:
Typically 0,1 % of span / °C for span and zero over operating range
Supply sensitivity:
> 0,025 % span output change per % supply pressure change
Failure mode:
Signal falls to bleed pressure when electrical supply fails
Mounting:
Integral surface mounting bracket provided for referred vertical mounting. 50 mm pipe mounting kit available.
Material:
Zinc die-casting passivated and epoxy paint, nitrile diaphragms, stainless steel/nylon flapper nozzle and supply valve
Weight:
1500 g approx.
General Information
Type* |
Pressure range and input signal options
Control signal Output pressure |
4090810.0000.000.00 |
1-10 V |
0,2-1 bar |
VP1001BJ100A00 |
|
|
4090812.0000.000.00 |
4-20 mA |
0,2-1 bar |
VP1001BJ400A00 |
|
|
4090820.0000.000.00 |
1-10 V |
0,2-2 bar |
VP1002BJ100A00 |
|
|
4090822.0000.000.00 |
4-20 mA |
0,2-2 bar |
VP1002BJ400A00 |
|
|
4090840.0000.000.00 |
1-10 V |
0,2-4 bar |
VP1004BJ100A00 |
|
|
4090842.0000.000.00 |
4-20 mA |
0,2-4 bar |
VP1004BJ400A00 |
|
|
4090860.0000.000.00 |
1-10 V |
0,14-6 bar |
VP1006BJ101A00 |
|
|
4090862.0000.000.00 |
4-20 mA |
0,14-6 bar |
VP1006BJ401A00 |
|
|
4090880.0000.000.00 |
1-10 V |
0,14-8 bar |
VP1008BJ101A00 |
|
|
4090882.0000.000.00 |
4-20 mA |
0,14-8 bar |
VP1008BJ401A00 |
|
|
* Part No.:
4090... : for distribution in Germany
VP10... : for distribution abroad
Please Note: For an input signal of 4-20 mA on the 6 bar and 8 bar units, a supply of
12/24 V (3-wire) is also required. |