CP10 FCP270 P270 The Field Control Processor 270 (FCP270) is a distributed, optionally fault-tolerant, field-mounted controller module. The FCP270 performs regulatory, logic, timing, and sequential control together with connected Fieldbus Modules (FBMs). It also performs data acquisition and alarm detection and notification. The FCP270 connects to the MESH control network via standard fiber optic 100 Mbps Ethernet. The fault-tolerant version of the FCP270 consists of two processor modules. These modules install in adjacent FCP270 slots in a baseplate for high speed communication between the modules. The unique and patented fault-tolerant operation of the FCP270 greatly imrpoves reliability relative to other process controllers. The fault-tolerant version of the FCP270 consists of two modules operating in parallel, with two Ethernet connections to the MESH control network. The two FCP270 modules, married together as a fault-tolerant pair, provide continuous operation of the controller in the event of virtually any hardware failure occurring within one module of the pair.
CP30A
CP30B
CP40A
CP40B
CP60
Micro I/A
　　　　
CP10 ZCP270 P270 The Z-Module Control Processor 270 (ZCP270) is an optionally fault-tolerant, Z-form factor controller. The ZCP270 performs regulatory, logic, timing and sequential control together with connected Fieldbus Communications Modules (FCMs) and Fieldbus Modules. It also performs data acquisition and alarm detection notification. The ZCP270 connects to the MESH control network and FCM 100Ets/FCM100Es via standard fiber optic 100 Mbps Ethernet. The FCM100Et interfaces the 2 Mbps Module Fieldbus used by the 200 Series FBMs and the FCM100E interfaces the 2Mbps Module Fieldbus used by the 200 Series FBMs or the 268 Kbps Fieldbus used by the 100 Series FBMs. Depending on sizing considerations, the ZCP270 can be used with a mix of FCM100E and FCM100Et modules. The fault-tolerant version of the ZCP270 consists of two single-width processor modules. These modules install in adjacent ZCP270 slots in a 1x8 or 2x8 mounting structure and connect to a fault-tolerant connector to allow for high-speed communication between the modules.
CP30A
CP30B
CP40A
CP40B
CP60
Micro I/A
　　　　
COMM15  + FDSI (Modbus, Profibus, OPC, Data Highway +) S61 The Foreign Device Systems Integrator (FDSI) allows a wide range of choices for users to link non-Foxboro devices into the I/A Series system ZCP & FCP 270 controllers. They area available with serial and Ethernet options, single and redundant links, and have approval ratings for corrosive and explosive environments. Communication channels are galvanically isolated for protection. These rugged, compact modules mount in standard, field-mounted I/A Series baseplates side-by-side with other system input/output Fieldbus Modules (FBMs). Like the other FBMs, their communication with the I/A Series system and controllers is through Foxboro's high-performance (100 Mbps/1Gbps), ultra-high availability field network. Each FDSI module can support up to 16 devices to read and write data, and up to 2,000 Distributed Control Interface (DCI) points. Ethernet versions can be fewer, depending upon implementation.
COMM30A
COMM30B