SST-100 |
SST-150 |
SST-200 |
up to 8.5MW |
up to 20MW |
up to 10MW |
The SST-100 is a single casing turbine, geared for generator drive; pre-engineered including balding as a cost-effective solution. Mainly used for industrial applications. |
The SST-150 is a single-casing turbine, providing geared drive to a 1,500 or 1,800rpm generator and packaged in a skid-mounted design. For power generation, it provides high efficiency together with a very compact arrangement. |
The SST-200 is a single-casing turbine, geared or with direct drive suited to both generator and mechanical drives. Used for industry and power generation applications. |
Technical data |
Technical data |
Technical data |
Power output up to 8.5MW |
Power output up to 20MW |
Power output up to 10MW |
Inlet pressure up to 65bar/945psi |
Inlet pressure up to 103bar/1,495psi |
Inlet pressure up to 110bar/1595psi |
Inlet temperature up to 480°C/895°F |
Inlet steam temperature up to |
Inlet temperature up to 520°C/970°F |
Rotational speed up to 7,500rpm |
505°C/940°F |
Controlled extraction up to 16bar/230psi and up to 350°C/560°F |
Exhaust pressure (back pressure) up to 10bar/145psi |
Rotational speed up to 13,300rpm |
Bleed up to 60bar/870psi |
Exhaust pressure (condensing) up to 1bar/14.5psi |
Bleed up to 25bar/365psi |
Exhaust pressure (back pressure) up to 16bar/230psi |
Exhaust area 0.22m2/2.4sq.ft. |
Controlled extraction up to 16bar/230psi |
Exhaust pressure (condensing) up to 0.25bar/3.6psi |
|
Exhaust pressure (back pressure) up to 10bar/145psi |
Exhaust area 0.17-0.34m2/1.8-3.7sq.ft. |
|
Exhaust pressure (condensing) up to 0.25bar/3.6psi |
|
|
Exhaust area 0.28 - 1.6m2/3.0 - 17.2sq.ft. |
|
Typical dimensions |
Typical dimensions |
Typical dimensions |
Length 8m/26ft. |
Length 12m/39ft. |
Length 4m/13.1ft.* |
Width 3.7m/12.1ft. |
Width 4m/13.1ft. |
Width 2m/6.5ft.* |
Height 3.4m/11.2ft. |
Height 5m/16.4ft. |
Height 2.5m/8.2ft.* |
 /DIV> |
 /DIV> |
*turbine skid only |
Features |
Features |
Features |
Back pressure/condensing type |
Back pressure/condensing type |
Back pressure/condensing type |
Package unit design |
Package unit design |
Package unit design |
Radial exhaust |
Pre-engineered turbine modules, |
Extensive pre-design |
Simple design, rigid rotor |
modular peripherals |
High-speed, downward/upward exhaust |
Oil system integrated in base frame |
Single controlled extraction |
Customized steam path |
Separate oil and steam piping |
Radial exhaust |
Short delivery time |
|
Separated oil and steam piping |
|
SST-300 |
SST-400 |
SST-500 |
up to 50MW |
up to 65MW |
up to 100MW |
The SST-300 is a single-casing turbine,geared for generator drive. It has a compact and flexible design with a high degree of standardization. Used for power generation applications. |
The SST-400 is a single-casing turbine, geared for generator drive. It has a compact and flexible design with a high degree of standardization. Used for industry and power generation applications. |
The SST-500 is a single-casing turbine, geared or with direct drive. It is suited to both generator and mechanical drives to accommodate large volume flows. Typically used as low-pressure casing in two-cylinder applications. |
Technical data |
Technical data |
Technical data |
Power output up to 50MW |
Power output up to 65MW |
Power output up to 100MW |
Inlet pressure 120bar/1,740psi |
Inlet pressure up to 140bar/2,030psi |
Inlet pressure up to 30bar/435psi |
Inlet temperature 520°C/970°F |
Inlet temperature up to 540°C/1,005°F |
Inlet temperature up to 400°C/750°F |
Rotational speed up to 12,000rpm |
Rotational speed 3,000-8,000rpm |
Rotational speed up to 15,000rpm |
Controlled extraction up to 45bar/655psi and up to 400°C/750°F |
Controlled extraction up to 45bar/655psi and up to 450°C/840°F |
Bleed up to 2, at various pressure levels |
Bleed up to 60bar/870psi |
Bleed up to 60bar/870psi |
Exhaust area 2 x 0.175-3.5m2/ |
Exhaust pressure (back pressure) up to 10bar/145psi |
Exhaust pressure (back pressure) up to 10bar/145psi |
2 x 1.9-24.8sq.ft. |
Exhaust pressure (condensing) up to 1bar/14.5psi |
Exhaust pressure (condensing) up to 0.25bar/3.6psi |
|
Exhaust area 0.28-1.6m2/3.0-17.2sq.ft. |
Exhaust area 1.3-3.0m2/14.0-32.5sq.ft. |
|
Typical dimensions |
Typical dimensions |
Typical dimensions |
Length 12m/39ft. |
Length 18m/59ft. |
Length 19m/62ft. |
Width 4m/13.1ft. |
Width 8.5m/28ft. |
Width 6m/20ft. |
Height 5m/16.4ft. |
Height 5.5m/18ft. |
Height 5m/16.4ft. |
Features |
Features |
Features |
Back pressure/condensing type |
Back pressure/condensing type |
Double-flow condensing turbine |
Pre-engineered turbine modules, |
Pre-engineered turbine modules, |
Standard turbine modules, modular |
modular peripherals |
modular peripherals |
peripherals |
Two controlled extractions |
Two controlled extractions, radial/axial |
Throttle-controlled |
Radial/axial exhaust |
exhaust |
Highly customized |
Adaptive stage up to 16bar |
Adaptive stage up to 16bar |
Customized steam path |
Package unit design |
Semi-package unit design |
|
Customized steam path |
Customized steam path |
|
|
Short delivery time |
|