Model: KGC200NS 50Hz Natural Gas

n  Genset Specification

The generator sets are compliant with ISO 9001 and CE standard, which include the following directives:

2006/42/EC Machinery safety.

2006/95/EC Low voltage

EN 60204-1: 2006+A1: 2009, EN ISO 12100: 2010, EN ISO 13849-1:2008, EN 12601: 2010

(1) PRP (Prime Power)

Prime power Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period.

In accordance with ISO 8528, ISO 3046.

(2) ESP (Standby Power)

Standby power: Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046 .

Standard Reference Conditions

Notice: Gas requirement of above generator

1. Methane concentrations�?/span>90%

2. Natural Gas inlet pressure 3-5Kpa, pressure change �?/span>1Kpa/min

3. Gas engine special lubricant is a must

Container Loading Capacity

2 SETS / 20GP

4 SETS / 40GP

Dimension & Weight

Note: This parameters allows for some acceptable deviations

n  Engine Specification

n  Alternator Specification

n  Battery

n  Breaker

n  Control Panel

Product description

DSE7320 series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three �?/span>remote�?/span> (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation. DSE7320 series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

Key Features

DSE7320 controller has six variants:

DSE7320: Automatic Start Module, it controls generator to start/stop by remote start signal;, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

Note: DSE7320 is taken as an example to describe in this manual.

1. 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;

2. Acrylic screen, improved wearable and scratch resistance property;

3. Silica-gel panel and keys can well adapt to higher and lower temperature;

4. With RS485 communication port, can achieve “three remote�?functions via MODBUS protocol;

5. With CANBUS port which can be connected to electronic injection with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, rotated speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.

6. Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;

7. Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;

8. Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency, over current and over power;

9. Precision measure and display of parameters about engine,

10.Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection;

11.With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output;

12. Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB interface (or PS485 interface) to adjust them via PC;

13.Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;

14.Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected;

15.With emergency start function;

16. With flywheel teeth numbers automatic identification function;

17. Power supply range: (8~35)VDC, accommodating to different starting battery volts;

18. All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;

19. With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;

20. Event log, real-time clock, scheduled start & stop pump unit (can be set as start pump unit once a day/week/month whether with load or not);

21. Add rubber gasket between shell and controller screen, the waterproof can reach IP55;

22. Controller is fixed by metal fixing clips;

23. Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation.

n  Soundproof Canopy

Description

Soundproof canopy generator sets are designed by professional acoustic engineers with over ten years of experience.

Key Features

• Multi-way air intake and exhaust guarantee the power performance of the generator.

•The large composite impedance type muffler effectively reduces the noise of the generator set.

•Internal high-performance rubber shock pad and flexible materials reduce generator set�?/span>s vibration

• The soundproof canopy is made of cold steel material.

• The best powder spray, chemical surface treatment before spraying to ensure corrosion resistance and coating quality

• Beautiful, nice and reliable. Beautiful, nice and reliable.

• Stainless steel locks and hinges.

• Adapt to all-weather operation

• Fireproof, rainproof, dustproof.

• High-performance soundproof materials can effectively reduce noise.