| GAS GENERATOR SET 1200KW /1000rpm 
GENSET SPECIFICATIONS
V-12,4-Stroke-Cycle-gas Bore--------------------------------------------------200mm Stroke------------------------------------------------255mm Displacement------------------------------------------96.1L Aspiration-------------------------------------turbocharger Control----------------------Electronic Speed governing Rated Speed---------------------------------------1000rpm Rated power (Prime)-----------------------------1200kW 1200GF20-T gas generating set are powered by model L12V200ZLT-2 gas engine produced by our company. Complying with National Standard “GB2820 General Specification for Industrial Frequency Diesel Generating Sets(eqv ISO 8528)�?and with reference to “IEC34-I�?rotary generator standard, the sets are equipped with high quality alternator of both home & abroad and self-made control panel according to customers requirement. This genset have the features of accurate voltage regulating, good dynamic performance, less voltage waveform distortion, high efficiency, compact structure, easy to maintain, low speed, reliable and long-life operation and cost-effective. The genset can either transfer electricity directly to load or be combined in a power station with two or more than two sets. They can be used as normal and stand-by power in oil field, factory, resource development base, etc. Main Features Engine Design - Designed by AVL, Austria - Intellectual Property belong to CNPC JICHAI POWER COMPANY LIMITED - Triaxiality Finite Element Analysis - Longer Stroke, More displacement - Low Speed (1000RPM), More Reliable - Advanced World Standard Performance Generator - Brushless Excitation - AVR - Better Insulation and Protection Safety - Low Oil Pressure Auto Stop Protection - Over Speed Auto Stop Protection - Explosion Proof - High Coolant Temperature Alarm - Low Coolant Level Alarm - High Oil Temperature Alarm - Complete Electrical Protection | - Emergency Stop Device Testing - Strict Inspection and Factory Test for Each Gen-set - Start Performance Test - Load Test - Synchronization Test - Safety System Test The Whole Equipment Supply - Standard Scope of Supply - Optional Equipment List - Repairing Tools - Spare Parts - Meet the Requirement for All Accessories of Project. Technical Support & Services - Free Technical Support and Training Service - 24/7 Technical Service Tel Number - Rapid Spare Parts Supply - After Sales Service for Generator Set Lifetime |
Property Parameter Table Model | 1200GF20-T | Engine type | L12V200ZLT-2 | Alternator type | 1FC series (SIEMENS technology) | Rated Power(Prime) kW | 1200 | Rated Speed rpm | 1000 | Rated Frequency Hz | 50 | Rated Voltage V | 6300V | Rated PF | 0.8 | Electrical efficiency | �?/span>38.7% | Cooling Method | Inter-cooling, With Horizontal Radiator | Emergency genset function | Automatic Device | Control Module | DSE8610 | Weight kg | 20600 | Dimension mm | 7500×2300×2800�?/span>Without Horizontal Radiator�?/span> |
*Rating and fuel consumption based on ISO Standard conditions (Ambient temperature at 25 degree Centigrade, Atmospheric pressure at 100kPa and Relative humidity at 30%). Site rating and fuel consumption should amend according to relative standard. Main Specification of Engine Model of engine | L12V200ZLT-2 | Rated Power(kW) | 1200 | Rated Speed(r/min) | 1000 | No. and layout of cylinders | 12-cylinder�?/span>60°Vee | Type | Four Strokes�?/span>V Type�?/span>Turbocharged Inter-cooling�?/span>Spark Plug Ignition | Bore(mm) | 200 | Stroke (mm) | 255 | Total displacement (L) | 96.1 | Specific oil consumption (g/kW.h) | �?.6 | Idle Speed�?/span>r/min�?/span> | 700 | Gas Pressure�?/span>kPa�?/span> | 100�?/span>400 | Heat Rate�?/span>kJ/kW·h�?/span> | �?850 | Exhaust Temperature (Before Turbocharger.�?span style="font-family: 微软雅黑, 'sans-serif'">�?/span> | �?50 | Water Outlet Temperature�?/span>�?span style="font-family: 微软雅黑, 'sans-serif'">�?/span> | �?5 | Water Inlet Temperature of Inter-cooler�?/span>�?span style="font-family: 微软雅黑, 'sans-serif'">�?/span> | �?5 | Lube Temperature�?/span>�?span style="font-family: 微软雅黑, 'sans-serif'">�?/span> | �?0 |
Main Specification of Alternator Model of alternator | 1FC series (SIEMENS technology) | Rated power(kW) | 1000 | Rated PF | 0.8 | Rated voltage(V) | 6300V | Rated speed | 1000 r/min | Rated frequency(Hz) | 50 | Exciting method | Brushless | Wiring method | Three phase four wire, Y type connection | Insulation class | F | Class of protection | IP23 | Cooling | A fan at the drive end draws the cooling air | Bearing structure | Duplex bearing | Direction of rotation | Clockwise (facing to generator drive end) |
Standard Scope of Supply
Cylinder block and Cylinder head assembly
-Cylinder block assembly -Oil sump assembly -Cylinder head assembly Crankshaft connecting rod system -Crankshaft assembly -Piston and connecting rod assembly -Torsional vibration assembly -Coupling assembly Inlet and Exhaust system -Air filter -Inlet System -Exhaust System -Valve mechanism -Exhaust gas turbocharger -Exhaust manifold -Corrugated pipe -Exhaust elbow -Exhaust silencer Lubricating System -Main oil pump -Pre-oil pump -Oil filter -Oil cooler -Oil Centrifugal filter -Pressure regulating valve and oil pipes. Cooling System - Horizontal Radiator (AC400V motor drive) Starting System - Starting motor - DC 24V Control / Monitoring and security systems -Genset smart control module (auto parallel and load sharing) -Monitor -Security system -Run/Auto/Stop control . Alternator -6 pole, drip proof, form wound type windings Spares -Normal repair tools -Special spare parts -Technical document -Certificate of quality Others -Common base -Battery charger
Optional Equipment Exhaust System - Exhaust pipe and silencer Preheating system - Oil heating system - Water heating system Spare Parts and Tools - Spare Parts for 2 years - Repairing Tools Others - Change control cable length according to site demand - Installation Engineering Construction Service - Maintenance service |
Item | Description | Model | Unit | Quantity | 1200GF20-T Natural Gas Genset | Gas engine | H16V190ZLT-1 | set | 3 | Generator | 1FC series | set | 3 | Genset Control Panel | GPL1200A | set | 3 | Pre-lub oil |
| set | 3 | Battery Charger |
| set | 3 | Cooling System | Horizontal Radiator | set | 3 | Exhaust System | Exhaust pipe and silencer |
| set | 3 | Steel canopy | silence canopy |
| set | 3 |
Remark: Delivery date: Three months after contract valid or negotiation by both parties. Terms of Payment: After contract, you should pay our company 30% of the contract amount andpayoff the other 70% before delivery. Installation and commissioning: If customer needs our company to do the guiding installation andcommissioning, our company will arrange two engineers to do the field service. All the feesincluding the traffic, living condition and insurance in abroad will be provided by the customer, andcustomer should pay our engineers 200.00 dollars per day per person.
|
Buyer
Inquiry Basket
Supplier
Register