| Code: | SAEX10.2-F10-B3-45-Ex de IIC T3-3ph/400V/50Hz-S2-15min-KS-A0001-6-8.2-11.-24-22.01-RH-10.1-DEAL-03[K]-F (IEC 85)-KT∙105 (Ex e)-N∙30∙60-IP68-GS100.3-52-F14-N-DC1-GGG.-DG (ISO)-Ex c IIC T3 / 190°C-KS-A0001-RR-N∙40∙60-IP68∙8-F10 |
| Wiring diagram: | TPA00R2AB-101-000 |
| Valve attachment: | F14-N || DG (ISO) || max. 2244 Nm || 17,3 s / 90 ° |
| Settings: | 2244 Nm [ 120 Nm ] || 90 ° [ 13 turns/stroke ] |
| Comment: | Coupling DGA-36X48,2 |
| Actuator design description: |
|
| SAEX10.2 | Ex proof multi-turn actuator S2-15min short-time duty, classes A and B acc. to EN 15714-2 |
| B3 | output drive: bore with 1 keyway (acc. to EN ISO 5210) ø d10 = 20 mm ( 20 ) |
| Ex de IIC T3 | explosion protection: acc. to ATEX II2G, IEC, CIS directive, Zone 1 (gas) |
| 3ph/400V/50Hz | mains voltage: three-phase AC 400 V 50 Hz |
| KS | corrosion protection: KS is suitable for units occasionally or permanently exposed to aggressive chemical substances, average total film thickness 140 μm |
| A0001 | colour: finish painting with standard colour for corrosion protection KN/KS/KX (AUMA silver-grey similar RAL7037) |
| RH | closing direction: clockwise |
| 6 | torque switching: single switch (1NC and 1NO) for each direction, switch contacts not galvanically isolated |
| 8.2 | limit switching: tandem switches (2NC and 2NO) for each end position, switches galvanically isolated |
| 10.1 | reduction gearing with fixed reduction |
| 11. | position indication: mechanical position indicator |
| 24 | blinker: blinker contact for running indication |
| 22.01 | heater: in switch compartment 110 V-250 V AC/DC |
| DE-AL | Name plate German, alluminium |
| 03[K] | motor protection: PTC thermistors 140 °C (according DIN 44082) |
| F (IEC 85) | motor winding insulation: insulation class F, tropicalized (IEC 85) |
| KT∙105 (Ex e) | ex-plug/socket connector KT (Ex e), cable entries with M-threads 1 x M20 x 1.5 / 1 x M25 x 1.5 / 1 x M32 x 1.5 |
| N∙30∙60 | temperature design: suitable for ambient temperature -30 °C to +60 °C |
| IP68 | enclosure protection IP68, submersible for max. 96 hours, max. 8 m head of water, up to 10 operations during the flooding |
| GS100.3 | Part-turn gearbox |
| F14-N | valve attachment F14 acc. to EN ISO 5211, without spigot |
| DC1 | duty class: motor operation acc. to EN 15714-2 |
| GGG. | worm wheel: made of spheroidal cast iron |
| DG (ISO) | coupling: two-flat bore according to EN ISO 5211 �?s H11 max. 55mm, ø d8 max. 72.2mm ( 0-55 ) |
| Ex c IIC T3 / 190°C | explosion protection: acc. to ATEX directive, Zone 1 (gas) / Zone 21 (dust) |
| KS | corrosion protection: KS is suitable for units occasionally or permanently exposed to aggressive chemical substances, average total film thickness 140 μm |
| A0001 | colour: finish painting with standard colour for corrosion protection KN/KS/KX (AUMA silver-grey similar RAL7037) |
| F10 | mounting flange for multi-turn actuator |
| RR | closing direction: clockwise |
| N∙40∙60 | temperature design: suitable for ambient temperature -40 °C to +60 °C |
| IP68∙8 | enclosure protection IP68, dust and water tight up to max. 8 m head of water, with pointer cover |
| Electrical data: | Motortype: ADX0071-4-0,40 || Speed: 1400 rpm || Power: 0,4 kW || In: 2,5 A || Imax: 3 A || Is: 8,5 A || cos phi: 0,42 |
| Weight / Unit: | 61 kg |
Buyer
Inquiry Basket
Supplier
Register