assembly, is a robust industrial gas turbine

designed for high flexibility. This turbine can be

used for both industrial power generation

(especially cogeneration and combined cycle

applications) and oil and gas applications.

Thanks to its compact design, the four-pole,

three-phase synchronous generator from the

SIEMENS SGen-100A-4P series is particularly

well suited for industrial use, too.

This turbine generator set is in excellent

condition and ready for transport immediately

from a warehouse in Germany. The nearest

overseas ports are Hamburg or Amsterdam. The

set was commissioned in 2008

Currently, a second, very similar SGT-800 set is for

sale, too.

Siemens gas turbine SGT-800 generator set

medium load and base load power generation

big spare parts package, OEM SIEMENS

upgrade to 50 MWe capacity possible before re-installationBusiness Opportunity �?Used 48 MWe GT Generator Set for Sale

status

availability

sales prices

new build cost (for comparison)

transport cost (for comparison)

decommissioned in April 2022 at 118,120 EOH

ready for immediate relocation, already dismantled,

packed and stored in our warehouse.

To be advised to serious customer including

all re-usable components and spare parts FOB

European ports Hamburg or Rotterdam

Euro 20 million approx.

(for an entire new plant as per Western Europe model case)

Euro 250.000 approx. just from warehouse to port

(cost is already included in above sales price)

Key Figures

main fuel type gas fuel assembly

dual fuel usage possible after conversion: gas, liquid fuel

electrical output 47,5 MWe gross capacity (approx.)

thermal output possible,

if used in a Combined Heat and Power (CHP) generation plant

efficiency 39,4 % in simple cycle mode

flue gas filter technology NOx emissions < 15 ppmvd

grid connection 50 Hz - flexible grid voltage, subject to transformer used

size of total installation 550 m2 (approx., without air inlet, fuel supply and stack)

length 32,6 m

width 16,85 m

hight 7,25 m

size of GT gen set 150 m2 (approx., GT plus generator in canopy)

2Business Opportunity �?Used 48 MWe GT Generator Set for Sale

weight of GT gen set 285 t (approx., with generator on foundation)

year of commissioning

/ year of last retrofit

2007 / ---

last overhaul Level D performed at 95,000 EOH

(new hot pass blades and vanes)

major upgrades / events 2010 turbine and burning chamber replaced to new one and

upgraded to 47.5 MW model A+ as per OEM package

2018 gear box generally revised and new main gear

wheel installed

Operating Figures

max. generation capacity 47.5 MWe (approx., at full load)

min. generation capacity (information will be provided on request)

cold start time: (information will be provided on request)

fuel quality former use was natural gas (German H-quality)

fuel consumption heat rate 9,147 kJ/kWh (8,670 Btu/kWh)

at full load

135 MJ/s (approx. at 50 MW turbine output power)

> also see turbine combustion diagram below in Impressions)

fuel consumption 115 MJ/s (approx. at 42 MW turbine output power)

at reduced load

fuel storage capacity not included

type of cooling air cooled

3Business Opportunity �?Used 48 MWe GT Generator Set for Sale

Technical Figures of Main Components

This power unit for sale comprises a 50 MW SIEMENS gas turbine and an approx. 50

MVA SIEMENS generator including a variety of spare parts:

steam turbine

main gear

generator

transformer

control and

communication system

Additional Information

spare parts

documentation

SIEMENS, type SGT-800

gross efficiency: 39.4 %

turbine combustion power at full load: 135 MJ/s

turbine speed: 6,600 rpm

pressure ratio: 19.8 : 1

exhaust mass flow: 124.7 kg/s

exhaust temperature: 560 °C

rotor weight 7,860 kg

engine weight 28,375 kg

Flender Graffenstaden, type: TX112/ 4C

SIEMENS, type: SGEN5-100A-4P

four-pole, three-phase synchronous generator

power factor: 1.0

output voltage: 11.5 kV

generator speed: 1,500 rpm

air cooled

65 MVA step-up transformer optionally available,

please ask the seller; to be purchased separately

Siemens PCS-7 �?for main system

ABB �?for generator exciter

all available spare parts included

all equipment documentation and operating instructions

complete maintenance record:

level A maintenance every 12,500 EOH (approx.)

Business Opportunity �?Used 48 MWe GT Generator Set for Sale

level C / B / D maintenance every 25,000 EOH (approx.)

marketing service fee will be paid by the seller

dismantling of unit not necessary �?unit is already dismantled and packed