|
|
|
China T165-2 Bulldozer T165-2 is a upgrade product of T165-1 bulldozer . It has characteristic of semi-rigid suspension , mechanical drive . The main clutch is hydraulic boosted . The articulated point of the implement cylinder is at both sides of the guard., With hydraulic pilot controlled , electric monitoring , good appearance, it can be used in road building , hydro-electric construction , field modification , port and mine development and other construction
T165-2 is a upgrade product of T165-1 bulldozer . It has characteristic of semi-rigid suspension , mechanical drive . The main clutch is hydraulic boosted . The articulated point of the implement cylinder is at both sides of the guard., With hydraulic pilot controlled , electric monitoring , good appearance, it can be used in road building , hydro-electric construction , field modification , port and mine development and other construction . Main specifications Overall dimensions (L × W × H) : 5416 × 3297 × 3160 mm (straight) 5566 × 3726 × 3160 mm (angle ) Operation weight: 17.8t(straight);18.2t(angle ) Flywheel power: 121kW Max. drawbar pull: 139.6 kN （ straight ）； 142.7kN （ angle ） (The efficient force depends on weight and ground surface adherence) Ground pressure (at operating weight): 69KPa Min. ground radium: 3.9 m Min. ground clearance: 352.5 mm Grade ability: Straight 30 ° Side 25 ° Diesel engine Manufactured factory: WEIFANG DIESEL ENGINE CO.,LTD Model: WD615T1-3B Type: straight line, water-cooled, with four stroke, pressure boost and direct injection Cylinders Number-bore diameter × travel distance: 6-126x 130mm Displacement: 9.726 L Rated RPM: 1800 r/min Rated power: 130 kW Max. torque 870 N · m/1200-1300 rpm Fuel consumption (at rated working condition) 225 g /kW · h oil consumption: 1.8 g /kW · h Admissible altitude ≤ 4000m Cooling method: closed circulation water cooled Starting method: electrically starting at 24V pressure Manufactured factory: SHANGHAI DIESEL ENGINE CO.,LTD Model: G128ZG8 Type: straight line, water-cooled, with four stroke, Cylinders Number-bore diameter × travel distance: 6-135x 150mm Displacement: 12.88 L Rated RPM: 1800 r/min Rated power: 130 kW Max. torque 838 N · m/1260 rpm Fuel consumption (at rated working condition) 224 g /kW · h oil consumption: 0.7 g /kW · h Admissible altitude ≤ 4000m Cooling method: closed circulation water cooled Starting method: electrically starting at 24V pressure Main clutch and transmission The flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting,. The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE . Travel speed (in theory 1800r/min engine speed) Forward Reverse First speed 2.5km/h First speed 3.5km/h Second speed 3.3km/h Second speed 4.6km/h Third speed 5.7km/h Third speed 7.9m /h Forth speed 7.5km/h Forth speed 10.5km/h Fifth speed 10.61km/h Steering and braking The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs. The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control. Final drive The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service. Undercarriage system Inner and outer beam of track roller frame are rectangular section “ 八” frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal. Track roller (each side): Singe flange 4 Double flange 2 Carrier roller(each side): 2 Idler (each side) 1 Type of track: single grouser combined Tension mode of track: hydraulic Pitch: 203mm Number of shoes(each side) 38 pieces Width of shoe 500mm Length of track on ground 2570mm Sealed and lubricated track ▲ The pitch , numbers and width of track shoes are the same with the general track. Implement hydraulic system It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines. Pump type: two group gear oil pump Pump flow : Front pump : 190L /min Pilot pump : 19L /min System pressure: 12MPa Cab The cab with adjustable seat features low noise and wide visible range and contains electrical fan. This following different kinds of cabs as follow can be chosen: " Cab with air-conditioner " Cab with Rops " Simple structure canopy Service refill
Fill location Capacity(L) Radiator and diesel engine water: 60 Lubricating system of diesel engine Oil: 25 （ G128 ）、 20 （ WD615 ） Flywheel house, main clutch oil ： 35 Transmission, bevel gear case Oil: 95 Final drive(each side) Oil: 24 Implement hydraulic system Oil: 80 Fuel tank Oil: 285 Idle track roller, carrier roller, front idler(each) Oil: 0.35 Blade specifications Blade Angle Straight Coal pushing （ Width 3762mm 3297 mm 4240mm Height 1140mm 1170 mm 1150mm Max digging depth : 400mm 420mm Max. ground clearance : 1000mm 852mm 1000mm Vertical tilting angle: 9 ° 8.5 ° 9 ° Note: ▲ indicates optional parts |
|
|
-------------------------------------------------------------------------------------------
|
