Status |
Short Text |
Quantity Requested |
Unit of Measure |
10 |
Interface Module
SIMATIC DP , CONNECTION IM - 153-1 , FOR ET 200M , FOR MAX 8 S7-300
MODULES
Manufacturer : SIEMENS ENERGY <(>&<)> AUTOMATION,IND. USA
P/N : ES7153-1AA03-0XB06
Interface Module
SIMATIC DP , CONNECTION IM - 153-1 , FOR ET 200M , FOR MAX 8 S7-300
MODULES
Manufacturer : SIEMENS ENERGY <(>&<)> AUTOMATION,IND. USA
P/N : ES7153-1AA03-0XB06 |
12 |
EA |
datasheet:
General information
Product type designation IM 153-1 DP ST
Vendor identification (VendorID) 801Dh
Supply voltage
Rated value (DC) 24 V
--- 24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
external protection for power supply lines
(recommendation)
not necessary
Mains buffering
--- Mains/voltage failure stored energy time 5 ms
Input current
Current consumption, max. 350 mA; at 24 V DC
Inrush current, typ. 2.5 A
I²t 0.1 A²·s
Output voltage
Rated value (DC) 5 V
Output current
for backplane bus (5 V DC), max. 1 A
Power loss
Power loss, typ. 3 W
Address area
Addressing volume
--- Inputs 128 byte
--- Outputs 128 byte
Hardware configuration
Number of modules per DP slave interface, max. 8
Interfaces
Transmission procedure RS 485
Interface physics, RS 485 Yes
Interface physics, FOC No
PROFIBUS DP
--- Node addresses 1 to 125 permitted
--- automatic detection of transmission rate Yes
--- Output current, max. 90 mA
--- Transmission rate, max. 12 Mbit/s
--- SYNC capability Yes
--- FREEZE capability Yes
--- Direct data exchange (slave-to-slave
communication)
Yes; Sender
--- Design of electrical connection of PROFIBUS
interface
9-pin sub D socket
1. Interface
PROFIBUS DP slave
--- GSD file (for DPV1) SIEM801D.GSD; SI01801D.GSG
--- automatic baud rate search Yes
Protocols
Bus protocol/transmission protocol PROFIBUS DP to EN 50170
Potential separation
Potential separation exists Yes
Isolation
Isolation tested with Isolation voltage 500 V
Degree and class of protection
IP degree of protection IP20
Ambient conditions
Ambient temperature during operation
--- min. 0 °C
--- max. 60 °C
Altitude during operation relating to sea level
--- Installation altitude above sea level, max. 3 000 m
Configuration
Configuration software
--- STEP 7 STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weights
Weight, approx. 360 g
|