, Vibration Transducer | Vibration Transducer Beijing Kere Measuring and Control Technique Co. Ltd., VRT-2T Technical Data: Type: Vibration and temperature transducer; Vibration measuring range: 0 ~ 20mm/s; Vibration measuring frequency range: 10 ~ 1000 Hz; Vibration measuring shock resistance: 5 times upper limit of range; Vibration measuring composite error: ±5%; Temperature measuring range: 0 ~ 150°C; Temperature measuring composite error: ±2%; Output characteristic: Two-wire system DC 4 ~ 20mA; Supply characteristic: 24 VDC, maximum 40VDC, maximum 30mA; Load characteristic: 0 ~ 1250 Ω; Ambient temperature range: -20°C ~ +80°C; Ambient humidity range: 0 - 100%; Mounting thread specification: M10*1.5*12. |
VRT-2 (T) Model Vibration Speed (&Temperature) Transducer Brief Introduction VRT-2 Model vibration speed transducer is a kind of minitype integrated two-wired probe transducer, whose output signal of 4 to 20mA is in direct ratio with RMS (root-mean-square) value of the vibration speed of the object being measured. The transducer adopted the integrated sensor with micromaching technique, which is imported from the USA. The Vibration electric signal passes through the band filter, converter, amplifier and RMS converter. Ultimately, the standard electrical current signal output of 4 to 20mA is generated by the voltage/current driving circuit. The transducer can measure the vibration speed (intensity) of the object within the range of prescribed limit of frequency bandwidth, with the DC output in direct ratio with RMS of vibration waveform. At the same time, the temperature changes accompanying the oscillating point can be measured (VRT-2T Model). For these reasons, it’s very suitable for all kind of large and medium rotary machine and moving equipments (such as fan, pump, reductor, bearing block and rolling friction element, etc.), to undertake the direct measurement of vibration safety and temperature rise safety without adding additional succeeding works for signal converting and scaling. The transducer is with low price and superior capabilities. The stainless steel anti-corrosion structure and fine sealing antiknock measures make it possible for the equipment to work on line for a long period of time under the formidable environment of measuring field, the two-wire system 4 to 20mA signal aspect adopted has very strong anti-interference remote transmitting abilities. The equipment can be matched directly with all kinds of general secondary instruments and computer data acquisition measuring and control system (such as DCS, PLC, etc.). It’s an indispensable vibration safety monitoring unit in modern industry, national defense and scientific research. Main technical specifications l Vibration measuring characteristic�?/span> Vibration measuring range ability�?/span> 0~20mm/s �?/span>optional�?/span> Vibration measuring frequency range�?/span> 10~1000HZ Vibration measuring shock resistance�?/span>5 times upper limit of range Vibration measuring composite error�?/span> ±5% l Temperature measuring characteristic�?/span>�?/span>temperature measurement is an option for the customer, when ordered, a “T�?will be added to the Model mark, ending up to be VRT-2T�?/span> Temperature measuring range�?�?50℃, Temperature measuring composite error�?/span> ±2% l Output characteristic�?/span> Two-wire system DC/4~20mA l Ambient characteristic�?/span> Ambient temperature range�?/span>�?/span>20~80�?/span> Ambient humidity range�?/span>0~100% l Supply characteristic�?/span> Maximum working current�?/span>30mA �?/span>equipped with voltage reversed polarity shield and operation indication lamp internally�?/span> Float operation voltage�?/span>15V Maximum operation voltage�?/span>40V Recommend working voltage�?/span>24V l Load characteristic�?/span> Load resistance range�?/span>0~1250Ω Maximum load resistance measurement and calculation�?/span> Rmax=�?/span>V�?/span>15�?/span>/0.02�?/span>V is the service voltage�?/span> l Electric connection�?/span> The positive power post of vibration and temperature transducer have been linked together respectively inside the VRT-2T. Refer to Figure 2 for typical wiring. The definition of the four lead out wire and the color of its junction are listed in the following table�?/span> Leading wire definition | Vibration positive(V+�?/span> | Vibration negative (V-) | Temperature positive (T+) | Temperature negative (T-) | Enclosure ground wire | VRT-2 type | Red | Green |
|
| Black, White | VRT-2Ttype | Red | Green | Red | White | Black |
l Exterior dimension and mounting structure�?/span> Exterior dimension:�?/span>32mm×88mm�?/span> The length and diameter of the temperature probe rod can be customize, with a mass of about 0.5kg�?/span> External thread mounting specification�?/span>M20×1.5�?/span>or customized); internal thread mounting specification�?/span> M10-hole depth :10mm�?/span>only used when no temperature option is used);Random mounting direction. Refer to figure 1 for exterior structure. l Others�?/span> For use under high humidity, please conceal the leading wire junction with silicon rubber�?/span>in field with ground interference�?/span>the enclosure ground wire can be grounded effectively�?/span>the probe is equipped with a lead out wire of 1m when the equipment leaves the factory. Please give clear indication of any other requirements in the order form. l The product is of totally-enclosed structure�?/span>please do not dismantle and wrest with force which will result in damage to it. If problems occur during operation, please contact with the producer. Quality assurance for two years. l The probe can be linked with �?/span>KR-32 Dual Channel Equipment Safety Monitor”directly, thus constitute the Equipment safety Monitoring System with such functions as digital display, alarm, linkage and network. l Kere Company also provide many other kinds of sensors, transducers and automated measuring and monitoring instruments, your consultations are welcome.
�?/span>Figure 1�?/span> Sketch Map for VRT-2�?/span>T�?/span>exterior structure
�?/span>Figure 2�?/span> Sketch Map for VRT-2�?/span>T�?/span>typical connection
|