Unit technical parameters |
Unit model |
ZIPF670PH |
Physical size/LWH mm |
3785×1710×2120 |
Weight (dry weight) kg |
5300 |
Normal power kVA/kW |
810/670 |
Rated voltage V |
440/255 |
Output frequency Hz |
60 |
Voltage steady state regulation % |
≤�?.5 |
Voltage transient regulation % |
�?20�?15 |
Voltage stability time s |
2.0 |
Voltage waveform distortion rate % |
�? |
Voltage fluctuation rate % |
�?.5 |
Frequency steady state regulation % |
≤�? |
Frequency transient regulation % |
�?10�?7 |
Frequency stability time s |
�? |
Frequency fluctuation rate % |
�?.5 |
Connection mode |
Three phase four wire |
Control system |
Microcomputer control system (Deep Sea) |
Damping system |
High elastic rubber shock absorber |
Noise (7 meters)dB |
94 |
Engine |
Engine type |
4006-23TAG3A |
Physical size/LWH mm |
3027×1706×1964 |
Weight kg |
2524 |
Power (commonly used/standby) kW |
705/786 |
type |
6 cylinder, straight line, turbo |
Oil type |
API CG SAE 15 w - and above |
Fuel type |
0 # diesel |
Specific fuel consumption
(g/kWh�?(L/h�?/DIV> |
210/172 |
Oil consumption g/kWh |
0.5% of the fuel |
Startup mode |
DC 24 v electric start |
Speed control mode |
Electric adjustment |
Cooling way |
Closed water circulation air cooling |
Fan power loss kW |
26 |
Mean effective pressure
kPa |
2452 |
Piston speed m/s |
9.5 |
Coolant flow L/s |
10 |
Inlet flow m3/min |
69 |
Exhaust flow m3/min |
193 |
Exhaust temperature �?/DIV> |
500 |
Compression ratio |
13.6�? |
Combustion mode |
Fuel injection |
Bore/stroke mm |
160/190 |
Total displacement L |
22.921 |
Generator |
Model (single bearing) |
LSA49.1M6 |
Physical size/LWH mm |
1519×792×1058 |
Weight kg |
1645 |
Power (commonly used/standby)
kW |
670/810 |
Rated voltage V |
440/255 |
Shell protection way |
IP23 |
Excitation mode |
AREP或PMG |
Short circuit current capacity |
300%In:10s |
Winding pitch |
2/3 |
Steady state voltage regulation |
0.5% |
Recovery time s |
�?.5 |
Waveform distortion rate THD |
�?% |
Telephone harmonic factor
THF |
�?% |
Influence factor TIF |
�?0 |
Control system |
Control module |
Deepsea7110(Automatic type �?/DIV> |
Display content
|
Ac line voltage, phase or three phase current, battery voltage, frequency, oil pressure, water temperature, operation time, display alarm failure, engine speed |
The main function
|
Low speed/overspeed alarm, charging failure, stop input, low oil pressure alarm, high temperature alarm, failed to start, there are three set output, but no derived from the start |